2 SAFETY AND ACCIDENT PREVENTION
2.6
Equipment and attachment parts
Equipment and attachment parts from third-
party manufacturers or those that have not
been generally approved by TEREX | Fuchs
for fitting or mounting must not be fitted to or
mounted on the machine without the prior
written consent of TEREX | Fuchs.
TEREX | Fuchs must provide the necessary
technical data for this purpose.
2.6.1
Retrofitting an electric motor
If an electric motor is switched off, it will
continue to rotate for a short period of time
and, as a result of this, voltage may be fed
into
the
on-board
Consequently, machine malfunctions may
occur. To prevent this, the motor must be
switched via a relay.
2.6.2
Additional devices (wireless,
mobile, radio)
If additional devices are connected, they must
satisfy the requirements of the international
standard ISO 13766. In particular, these
devices must not output interferences above
24 V/m.
j Failure to observe this notice may result
in malfunctions to the machine control
unit, potentially causing severe or even fatal
injuries as well as serious damage to the
machine.
2.24
power
supply.
MHL380 D
Need help?
Do you have a question about the Fuchs MHL380 D and is the answer not in the manual?
Questions and answers
Как поменять в коробке масло на фуксе 331