Reset Alarm Status (Rst Alrm Off / On) - rotork YT-3300 Series Product Manual

Smart Positioner
YT-3300 / 3350 / 3303 / 3301 series (New Software)

Reset Alarm Status (RST ALRM oFF / on)

9.12.6
The alarm is automatically released when the cause of the alarm is removed. For example, if the Partial
Stroke Test fails or Auto Calibration fails, use this function to release the alarm.
Below is an alarm list that can be released using the RST ALRM function.
1) Auto Calibration Running
2) Non-Critical NVM Fail
3) PST Fail
4) Auto Calibration Fail
Ver. 2.06
3 seconds
→
Press <UP> or
<DOWN> button
if the above is not
displayed.
<UP>/<DOWN>
→
103
→
Press <UP> or
<DOWN> button
if the above is not
displayed.
<ESC>
→
Product Manual
3 seconds
→
<ESC>
3 times
→