Restoring The Product To Factory Default Settings (Initialization) - Yamaha AG08 User Manual

Troubleshooting > Restoring the product to factory default settings (initialization)
Restoring the product to factory default settings
(initialization)
Follow the steps below to initialize and restore the product to its factory default settings. This initializes all of
the settings including the parameters you modified using the AG08 or the AG08 Controller app, the CH1
PRESET data, the SOUND PAD audio data and so on.
1
Set the [z] (standby/on) switch to standby for the time being.
2
Set the [z] (standby/on) switch to on while holding down the [COMP EQ] button
for channel 1.
All of the LEDs on the top panel flash twice, and initialization begins. Wait until the LED light animation is
finished. Initialization takes about 50 seconds.
75