Advertisement
CHANGE WATERING (RUN) DAYS
Note: Before Editing Run Days, verify in controller default screen what current week of 6‐week schedule
is. If current week is Week 6 (W6), then Week 1 will be next week (looping 6‐Week Schedule).
1. From the default screen (press ESC twice to reach screen if not in it), press the Right Arrow Key on
the controller keypad until SCHEDULE DATA is displayed in the screen.
2. Press the Down Arrow Key until Run Days is displayed in the screen.
3. Press the Enter Key to view the Run Days Edit Screen.
4. Press the Up Arrow Key to Select the Week (1‐6) you want to edit.
5. Press the Right Arrow Key so the cursor is on the Day.
6. Press the Up Arrow Key to Select the Day of The Week.
7. Use the ON / YES Key to make that day a watering Day or use the OFF/ NO Key to make that Day a
non‐watering day.
8. Make desired changes for all 6 weeks of the schedule.
9. Press the ENTER Key to save changes.
10. Press the ESC Key twice to return to Default screen.
CHANGE START TIMES
Note: Each of the 16 Programs can have up to 8 Start Times.
1. From the default screen (press ESC twice to reach screen if not in it), press the Right Arrow Key on
the controller keypad until PROGRAM DATA is displayed in the screen.
2. Press the Down Arrow Key until Start Times is displayed in the screen.
3. Press the Enter Key to view the Start Times Edit Screen.
4. Press the CLUSTER / SCHEDULE SELECT Key and the PROGRAM SELECT Key to choose the Cluster
and Program # to edit.
5. Press the Up Arrow Key to Select the Start Time (ST 1‐8) to enter or edit.
6. Press the Right Arrow Key to move the Cursor to the Time.
7. Use the Numeric Keypad to enter the Start time and the Up or Down Arrow Key to select AM or
PM.
8. Press the ENTER Key to save changes.
9. Press the ESC Key twice to return to Default screen.
SENTINEL SATELLITE QUICK REFERENCE
Page 7 /8
Advertisement
