Sony DVS-9000 User Manual page 64

• When Draw is selected
Knob Parameter
1 Mix
2 Clip
3 Gain
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
b) The larger the Clip value, the narrower the outline width.
• When Relief is selected
Knob Parameter
1 Mix
2 Offset
3 Gain
4 Angle
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
• When Sharp is selected
Knob Parameter
1 H
2 V
3 All
5 Coring
5
If you selected other than Sharp in step 3, depending on the necessity,
proceed as follows.
• To adjust the outline color for Edge Color or Draw
Turn [Edge Matte] on and set the following parameters to set the outline
color.
Knob Parameter
1 Luminance
2 Saturation
Adjustment
Mix amount for Draw video and
input video
Reference level for outline
extraction
Image gain for outline extraction
Adjustment
Mix amount for Relief video and
input video
Relief luminance level
Image gain for outline extraction
Direction of relief image light
source
Adjustment
Simultaneously adjust the left and
right resolution
Simultaneously adjust the top and
bottom resolution
Simultaneously adjust the
resolution of all four sides
Minimum value of edge to
emphasize
Adjustment
Luminance
Saturation
Setting values
a)
0.00 to 100.00
–100.00 to +100.00
–100.00 to +100.00
Setting values
a)
0.00 to 100.00
–100.00 to +100.00
–100.00 to +100.00
–8.00 to +8.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
DME Special Effect Operations
b)
63