CORSAIR Dark Core RGB Pro - Wireless FPS/MOBA Gaming Mouse Manual

Also See for Dark Core RGB Pro:

Manual (6 pages)

Table of Contents

Contents

1 CHARGING THE MOUSE - USB
2 GETTING TO KNOW YOUR MOUSE
3 SETTING UP 2.4GHZ SLIPSTREAM WIRELESS
4 SETTING UP BLUETOOTH WIRELESS
5 BATTERY/WIRELESS AND DPI/LED STATUS LED INDICATORS
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

CORSAIR Dark Core RGB Pro - Wireless FPS/MOBA Gaming Mouse Manual

CHARGING THE MOUSE - USB

The DARK CORE RGB PRO mouse must be fully charged before its first use. Connect the mouse to an available USB 2.0 or 3.0 port on your PC with the USB charging / data cable. The battery/wireless status LED indicator on the mouse will begin pulsing green to denote battery charging and will turn solid when charging is complete.

GETTING TO KNOW YOUR MOUSE

Overview

LEFT CLICK BUTTON
RIGHT CLICK BUTTON
MIDDLE CLICK BUTTON
PROFILE CYCLE BUTTON
DPI UP BUTTON
DPI DOWN BUTTON
FORWARD BUTTON
BACKWARD BUTTON
BATTERY / WIRELESS STATUS LED INDICATOR
INTERCHANGEABLE SIDE GRIP
USB CHARGING / DATA PORT
DPI/PROFILE STATUS LED INDICATOR
OPTICAL GAMING SENSOR
PTFE GLIDE PADS
POWER / WIRELESS MODE SWITCH
USB WIRELESS RECEIVER
USB CHARGING / DATA CABLE

SETTING UP 2.4GHZ SLIPSTREAM WIRELESS

Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming grade performance.

Toggle power / wireless mode switch to "2.4GHz" position to turn on your mouse.
Connect the USB wireless receiver to an available USB 2.0 or 3.0 port located on the front panel of your PC or nearby USB pass-through port (e.g. on CORSAIR MM800 and MM1000 mousepads).
The battery/wireless LED indicator will turn solid white when connected.
Download the iCUE software from www.corsair.com/downloads.
Run the installer program and follow instructions for installation.

If reconnection is required, initiate USB wireless receiver pairing via the iCUE software settings menu.

SETTING UP BLUETOOTH^® WIRELESS

Bluetooth wireless is best for everyday computing tasks, productivity and office applications.

Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
Press and hold PROFILE CYCLE button.
Toggle power / wireless mode switch to "BT" position to turn on your mouse.
Follow the instructions to successfully connect your device.
The battery/wireless LED indicator will turn solid blue when connected.

BATTERY/WIRELESS AND DPI/LED STATUS LED INDICATORS

BATTERY STATUS	BATTERY/WIRELESS STATUS LED INDICATOR
BATTERY CHARGING	PULSING GREEN
BATTERY CRITICAL, RECHARGE REQUIRED	PULSING RED
BATTERY LOW, RECHARGE SOON	BLINKING RED
BATTERY MEDIUM	BLINKING AMBER
BATTERY HIGH	BLINKING GREEN
BATTERY CHARGED	GREEN
WIRELESS STATUS
2.4GHz WIRELESS MODE – PAIRING	BLINKING WHITE
2.4GHz WIRELESS MODE – PAIRED	WHITE
2.4GHz WIRELESS MODE – PAIRING FAILED	PULSING WHITE
BT WIRELESS MODE – PAIRING	BLINKING BLUE
BT WIRELESS MODE – PAIRED	BLUE
BT WIRELESS MODE – PAIRING FAILED	PULSING BLUE
DPI STAGE STATUS	BATTERY/WIRELESS STATUS LED INDICATOR
	LED #1	LED #2	LED #3
STAGE #1	CYAN	OFF	OFF
STAGE #2	CYAN	CYAN	OFF
STAGE #3	CYAN	CYAN	CYAN
ONBOARD PROFILE STATUS
PROFILE #1	RED	OFF	OFF
PROFILE #2	OFF	GREEN	OFF
PROFILE #3	OFF	OFF	BLUE

WEB: corsair.com
BLOG: corsair.com/blog
PHONE: (888) 222-4346
FORUM: forum.corsair.com
SUPPORT: support.corsair.com
YOUTUBE: youtube.com/corsairhowto

© 2019 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-001955 AA