Vermeer SC362 Operator's Manual
  1. Manuals
  2. Brands
  3. Vermeer Manuals
  4. Cutter
  5. SC362
  6. Operator's manual

Vermeer SC362 Operator's Manual

Stump cutter
Hide thumbs
Table of Contents

Advertisement

Quick Links

SC362 Stump Cutter
Operator's
Manual
SC362_o1_00
Serial No. 101 -
Order No. 105400CT8
Cabled Assembly Order No. 163708565

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC362 and is the answer not in the manual?

Questions and answers

Related Manuals for Vermeer SC362

Summary of Contents for Vermeer SC362

  • Page 1 SC362 Stump Cutter Operator’s Manual SC362_o1_00 Serial No. 101 - Order No. 105400CT8 Cabled Assembly Order No. 163708565...
  • Page 2 This manual explains the proper operation of your machine. Study and understand these instructions thoroughly before operating or maintaining the machine. Failure to do so could result in personal injury or equipment damage. Consult your Vermeer dealer if you do not understand the instructions in this manual, or need additional information.
  • Page 3 Orientation: Forward travel of this machine is away from the cutter wheel. Right and left sides are determined when facing in the direction of forward travel. RADEMARKS VERMEER, VERMEER Logo, AUTOSWEEP, and YELLOW JACKET are trademarks of Vermeer Manufacturing Company. VANGUARD and BRIGGS & STRATTON are trademarks of Briggs and Stratton Corporation. SC362 Stump Cutter...
  • Page 4 Vermeer’s option without charge by any authorized independent Vermeer dealer. The warranty repair or replacement must be made by a Vermeer independent authorized dealer at the dealer’s location. Vermeer will pay for replacement parts and such authorized dealer’s labor in accordance with Vermeer’s labor reimbursement policy. Vermeer reserves the right to supply remanufactured replacement parts as it deems appropriate.
  • Page 5 (7) Transportation costs, if any, of transporting to the Vermeer dealer. Freight costs, if any, of transporting replacement parts to the Vermeer dealer. (8) The travel time of the Vermeer dealer’s service personnel to make a repair on the retail purchaser’s site or other location (9) In no event shall Vermeer’s liability exceed the purchase price of the product, 10) Vermeer shall not be liable to any person under any circumstances for any incidental or consequential damages (including but not limited to, loss of profits, out of service time) occurring for any reason at any time.
  • Page 6 (12) Depreciation damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow operating instructions, misuse, lack of proper protection during storage. (13) Accessory systems and electronics not of Vermeer’s manufacture are warranted only to the extent of such manufacturer’s respective Limited Warranty if any.
  • Page 7 NO DEALER WARRANTY. The selling dealer makes no warranty of its own and the dealer has no authority to make any representation or promise on behalf of Vermeer or to modify the terms or limitations of this warranty in any way.
  • Page 8 This page intentionally left blank.
  • Page 9 ___ Check all shields for installation and condition. ___ Check machine for proper lubrication. ___ Check condition of all safety signs and decals. ___ Check all phases of operation. ___ Check for loose hardware. SC362 Stump Cutter Receiving and Delivery Report i...
  • Page 10 ___ Check cutter wheel Yellow Jacket pocket bolts for proper torque: 200–215 ft-lb (271–291 Nm). ___ Check that the neutral start function operates properly. ___ Check that Operator Presence system and indicator lights operate properly. ii Receiving and Delivery Report SC362 Stump Cutter...

  • Page 11: Delivery

    Review and demonstrate with the customer the various aspects of stump cutter operation: ___ overall explanation of how the machine works ___ machine safety ___ preparing the machine for operation ___ operating the machine SC362 Stump Cutter Receiving and Delivery Report iii...

  • Page 12: Dealer/Owner Information

    WNER NFORMATION dealer owner address address city city state / province state / province zip / postal code zip / postal code country country phone number phone number email address email address iv Receiving and Delivery Report SC362 Stump Cutter...

  • Page 13: Identification Numbers - Record

    Machine Serial Number ____________________ ACHINE DENTIFICATION ECAL This decal provides easy identification of the model and 17-digit identification number. The barcode contains the machine’s VIN number and can be scanned with any barcode reading device. SC362 Stump Cutter Receiving and Delivery Report v...
  • Page 14 Briggs and Stratton Engine Model Number ____________________ Briggs and Stratton Engine Serial Number ____________________ vi Receiving and Delivery Report SC362 Stump Cutter...

  • Page 15: Table Of Contents

    Preparing the Machine and Work Area..40-1 SC362 Intended Use ....... 15-1 Operator Qualifications .
  • Page 16 Machine - Grease ....... . . 60-2 Maintenance Intervals......60-2 viii Table of Contents SC362 Stump Cutter...

  • Page 17: Safety Messages

    This is the safety alert symbol. This symbol is used in combination with an exclamation mark or other symbols to alert you to the potential for bodily injury or death. WARNING: Read and safety signs, and watch the operations and safety Operator’s Manual video, before operating machine. SC362 Stump Cutter Safety Messages 10-1...
  • Page 18 WARNING: Wear personal protective equipment. Dress properly. Refer to “Personal Protective Equipment,” page 40-1. WARNING: Keep spectators away. WARNING: Engine exhaust can asphyxiate. Operate only outdoors. WARNING: Use Shutdown Procedure before servicing, cleaning, repairing or transporting machine. Follow Shutdown Procedure, page 23-1. 10-2 Safety Messages SC362 Stump Cutter...
  • Page 19 Shut off engine before refueling. No flame. No smoking. WARNING: Be sure that all safety devices, including shields, are installed and functioning properly after servicing the machine. WARNING: Make no modifications to this equipment unless specifically recommended by Vermeer Corporation. SC362 Stump Cutter...
  • Page 20 WARNING: Failure to follow any of the preceding safety instructions or those that follow within this manual, could result in serious injury or death. This machine is to be used only for those purposes for which it was intended as explained in this Operator’s Manual. 10-4 Safety Messages SC362 Stump Cutter...

  • Page 21: Intended Use

    Section 15: Intended Use SC362 Intended Use The Vermeer SC362 stump cutter is designed solely for use in removing tree stumps and roots to below ground level by cutting and grinding. Always use the machine in accordance with the instructions contained in this Operator's Manual, safety signs on the machine, and other material provided by Vermeer Corporation.
  • Page 22 This page intentionally left blank.

  • Page 23: Machine Controls

    Push in ......... .choke off SC362 Stump Cutter...

  • Page 24: Engine Monitors

    NGINE ONITORS Hourmeter • Records total machine operation time. Engine Oil Pressure • If oil pressure is low, engine will shut down. • Refer to Engine Operation Manual. 20-2 Machine Controls SC362 Stump Cutter...

  • Page 25: Ground Drive/Cutter Wheel Controls

    RPM in the operating range. Cutter wheel drive will disengage and cutter wheel brake will engage if operator’s hand is removed from all three levers. For more information, Refer to “Operator Presence System,” page 50-4. SC362 Stump Cutter Machine Controls 20-3...
  • Page 26 Pull down ........low speed 20-4 Machine Controls SC362 Stump Cutter...
  • Page 27 • Cutter wheel will not remain engaged if this light is disconnected or shorted to ground. Maintain light in good working condition. (Ignition switch must be in RUN position.) SC362 Stump Cutter Machine Controls 20-5...
  • Page 28 Clockwise ........increase speed Counterclockwise ......decrease speed 20-6 Machine Controls SC362 Stump Cutter...

  • Page 29: Ground Drive Wheel Lock

    Position wheel lock pins in as shown to engage ground drive wheels. Position wheel lock pins out as shown to disengage ground drive. NOTICE: Never move machine with only one lock pin engaged unless machine is on smooth, level ground. SC362 Stump Cutter Machine Controls 20-7...

  • Page 30: Hydraulic Steer

    Pull ..........turn left 20-8 Machine Controls SC362 Stump Cutter...

  • Page 31: Starting Procedure

    As the engine warms up, move choke control in to run position. Step 6: Adjust throttle (2) to get an even idle speed, and allow engine to warm up before engaging the cutter wheel. SC362 Stump Cutter Starting Procedure 22-1...

  • Page 32: Jump-Starting

    If equipped, ensure battery caps are in place and tight on both the machine battery and the booster battery to reduce risk of battery explosion. NOTICE: The machine has a 12-volt starting system. Use only a 12-volt system for jump-starting. 22-2 Starting Procedure SC362 Stump Cutter...

  • Page 33: Battery Burns - Avoid

    Do not attach to negative (-) terminal of discharged battery. Step 5: Try starting the engine. Refer to “Starting the Engine,” page 22-1. After starting the engine, disconnect jumper cables in reverse order. Step 6: BOOSTER BATTERY SC362 Stump Cutter Starting Procedure 22-3...

  • Page 34: Cold Weather Starting

    Before starting the engine, refer to the Engine Operation Manual section on cold weather starting for correct procedures. Refer to “Starting the Engine,” page 22-1. NOTICE: Reduce engine speed if hydraulic pump squeals. Pump squealing may indicate lack of oil which can damage the pump. 22-4 Starting Procedure SC362 Stump Cutter...

  • Page 35: Shutdown Procedure

    This allows engine temperatures to decrease and equalize, which will increase engine life. Shut off engine and remove key. Step 3: Step 4: Wait for the cutter wheel to stop turning. SC362 Stump Cutter Shutdown Procedure 23-1...

  • Page 36: Quick Stop Procedure

    UICK ROCEDURE Step 1: Release control levers to disengage and stop cutter wheel. Step 2: Shut off engine and remove key. 23-2 Shutdown Procedure SC362 Stump Cutter...

  • Page 37: Transporting The Machine

    NOTICE: Until the operator has become familiar with the controls and understands the capability of the machine, use a slower engine speed and LOW ground drive speed when operating ground drive controls. Survey the area around the machine for persons or obstacles before driving or moving machine. SC362 Stump Cutter Transporting the Machine 30-1...

  • Page 38: Loading Machine Onto Truck Bed Or General Purpose Utility Trailer

    WARNING: Before transporting machine on truck or trailer, read the truck or trailer manual for safety precautions and information. WARNING: Machine may slide down loading ramp or off trailer deck. Serious injury or death may result. Do not load onto slick trailer surface. 30-2 Transporting the Machine SC362 Stump Cutter...
  • Page 39 Position centerline of machine with centerline of the trailer. Drive machine squarely onto the trailer. Stop machine when tie-down position is reached. The tie-down position distributes the weight on the trailer as recommended by the trailer manufacturer. Step 5: Shut off engine and remove key. SC362 Stump Cutter Transporting the Machine 30-3...
  • Page 40 Step 2: Remove tie-downs. Step 3: Refer to “Starting Procedure,” page 22-1. Step 4: Raise and center cutter wheel. Drive machine squarely off the truck or trailer. Step 5: 30-4 Transporting the Machine SC362 Stump Cutter...

  • Page 41: Machine - Clean Before Transporting

    Compressed air can also push moisture through some connector and component seals. Do not point air nozzle directly at seal areas. Clean machine to keep debris off road and from striking other vehicles during transport. SC362 Stump Cutter Transporting the Machine 30-5...
  • Page 42 This page intentionally left blank.

  • Page 43: Preparing The Machine And Work Area

    Actual sound levels may vary widely depending on your working conditions. To determine the level of hearing protection your work environment requires, enlist the help of your local environmental noise specialist. SC362 Stump Cutter Preparing the Machine and Work Area 40-1...

  • Page 44: Sound Levels

    Use eye and face protection. NOTICE: Face shields must meet ANSI Standard Z87.1 - 2010 and must be marked ‘Z87+’. Face shields are available from various sources, including your local Vermeer dealer. • Other workers in the immediate area must also wear hard hats, hearing, and eye protection.

  • Page 45: Vibration Levels

    The actual sound levels for your application and operating conditions may be different. Vibration Levels Hand-Arm vibration exposure has been measured according to test procedures specified in ISO 5349. The level is less than 2.5 m/s SC362 Stump Cutter Preparing the Machine and Work Area 40-3...

  • Page 46: Prepare Machine

    Line notch in dual tire rim up with key on machine tire rim. Step 3: Install washers (1) and 3/8 x 8˝ bolts (2). Tighten to 120 in-lb (13.5 Nm). Step 4: Reverse Steps 1–3 to remove duals. 40-4 Preparing the Machine and Work Area SC362 Stump Cutter...

  • Page 47: Fuel Tank - Fill

    Engine Operation Manual.) Do not fill tank to the very top, leave room for expansion. Open service access hood (1) and remove gas fill cap (2) to fill tank. SC362 Stump Cutter Preparing the Machine and Work Area 40-5...

  • Page 48: Hydraulic Fluid Level - Check

    Specifications Maintenance Manual). NOTICE: The hydraulic fluid must be free of bubbles. Bubbles are trapped air that is entering the hydraulic system. Step 3: Install fill cap (3). 40-6 Preparing the Machine and Work Area SC362 Stump Cutter...

  • Page 49: Engine System - Check

    Refer to the Engine Operation Manual for details. Check air cleaner (3) condition. Remove dirt and debris and check for loose Step 3: or damaged parts. SC362 Stump Cutter Preparing the Machine and Work Area 40-7...

  • Page 50: Air Cleaner Restriction Indicator - Check

    Do not cross cut exposed surface roots. The cutter wheel may grab a cut length of root and throw it toward the operator. WARNING: Keep spectators away. 40-8 Preparing the Machine and Work Area SC362 Stump Cutter...

  • Page 51: Underground Utility Contact

    If the utility cannot be precisely located, it must be shut off by the utility company. SC362 Stump Cutter Preparing the Machine and Work Area 40-9...
  • Page 52 This page intentionally left blank.

  • Page 53: Operating The Machine

    Wear hard hat, eye protection, and face shield. WARNING: Thrown objects from rotating cutter wheel can injure others. Keep cutter wheel down and spectators away. Shut off power to cutter wheel before transporting machine. SC362 Stump Cutter Operating the Machine 50-1...

  • Page 54: Cutter Wheel Guard

    The cutter wheel guard pivots to allow it to float over obstructions. Never secure guard in the raised position while cutting a stump. WARNING: Never work on or near the cutter wheel unless the engine is shut off and the cutter wheel stopped. 50-2 Operating the Machine SC362 Stump Cutter...

  • Page 55: Runover/Rollover Prevention

    Never attempt to manually move the stump cutter on sloped or uneven ground with the wheel lock pins disengaged. Loss of control may result. WARNING: Machine rollover can crush, resulting in serious injury or death. Do not ride on machine when operating ground drive system. SC362 Stump Cutter Operating the Machine 50-3...

  • Page 56: Operator Presence System

    The Operator Presence system is intended to help protect the operator and must be maintained in good working condition. Refer to “Operator Presence System - Check/Service” in the Maintenance - 100 Service Hours section of Maintenance Manual, for procedures to test and maintain this system. 50-4 Operating the Machine SC362 Stump Cutter...

  • Page 57: Engine Operating Angle

    The boom angle should be adjusted or the machine repositioned to reduce engine operating angle. SC362 Stump Cutter Operating the Machine 50-5...

  • Page 58: Cutting Stumps

    With other hand, push Throttle Control Lever (2) to maximum engine RPM. Step 4: NOTICE: Cut stump using only the recommended cutting area. Horizontal line Recommended cutting area 80° down from horizontal line 50-6 Operating the Machine SC362 Stump Cutter...
  • Page 59 When Cutter Wheel Swing Control Lever is actuated, the AutoSweep control system monitors engine speed and adjusts swing speed by varying hydraulic oil flow to the swing system to maintain engine RPM in the operating range. SC362 Stump Cutter Operating the Machine 50-7...
  • Page 60 Step 6: Repeat previous procedures for cutting the stump. WARNING: Do not cross cut exposed surface roots. The cutter wheel may grab a cut length of root and throw the root toward the operator. 50-8 Operating the Machine SC362 Stump Cutter...

  • Page 61: Removing Chips

    Shutdown Procedure, 23-1. Step 4: Clear chips with a rake or shovel. Step 5: Move machine back into position. When the cutting operation is complete, shut down machine. Follow Shutdown Procedure, page 23-1. SC362 Stump Cutter Operating the Machine 50-9...
  • Page 62 This page intentionally left blank.

  • Page 63: Maintenance Intervals

    Shutdown Procedure, 23-1. Visually inspect machine daily before starting the machine. Make no modifications to your equipment unless specifically recommended by Vermeer Corporation. AFETY IGNS Safety signs located on your machine contain important and useful information that will help you operate your equipment safely.

  • Page 64: Machine - Grease

    AINTENANCE NTERVALS = Initial maintenance on new machine. Regular maintenance interval may be different. Initial = Regular maintenance interval. For Vermeer part numbers, consults your Parts Manual. Maintenance Interval - Service Hours Service Required Engine Oil and Filter- Change/Replace...
  • Page 65 Engine Oil/Filter- Change/Replace  Controls - Check  Spark Plugs Condition - Check  Engine Cooling Areas - Clean  Hydraulic System - Check  Overall Machine - Check  Safety Signs - Maintain SC362 Stump Cutter Maintenance Intervals 60-3...
  • Page 66 Engine System - Check  Air Cleaner Elements/ Replace  Cutter Wheel Guard Pivot - Lubricate  Battery - Replace  Fuel Tank - Fill  Cutter Wheel Belt - Replace  Jackshaft Belts - Replace 60-4 Maintenance Intervals SC362 Stump Cutter...
  • Page 67 Maintenance Interval - Service Hours Service Required  Hydraulic Pump Belt - Replace  Cutter Teeth - Replace  Containment Curtains - Replace  Machine - Store SC362 Stump Cutter Maintenance Intervals 60-5...
  • Page 68 This page intentionally left blank.
  • Page 69 Engine Controls, 20-1 Engine Monitors, 20-2 Engine Operating Angle, 50-5 Engine System - Check, 40-7 Machine - Clean Before Transporting, 30-5 Machine - Grease, 60-2 Fuel Tank - Fill, 40-5 Machine Controls, 20-1 Machine Identification Decal, v SC362 Stump Cutter Index...
  • Page 70 Preparing the Machine and Work Area, 40-1 Quick Stop Procedure, 23-2 Receiving and Delivery Report, i Removing Chips, 50-9 Runover/Rollover Prevention, 50-3 Safety Messages, 10-1 Safety Signs, 60-1 Safety Symbol Explanation, 10-1 SC362 Intended Use, 15-1 Shutdown Procedure, 23-1 Sound Levels, 40-3 Index SC362 Stump Cutter...
  • Page 71 Revision History Revision Date Pages Description o1_00 12/13 1st Edition Operators Manual Released. SC362 Stump Cutter Revision History...
  • Page 72 The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Copyright 2013. All rights reserved. Vermeer Corporation 1210 Vermeer Road East, P.O. Box 200 Pella, Iowa 50219-0200...

Table of Contents

Save PDF