Table of Contents
Advertisement
MLM1834-Li by MacAllister
Battery pack
Charging the battery pack
The battery pack (20) for this product has been shipped in a low charge condition.
Charge it fully before first use.
Refer to the charger instruction manual (MFC18) for the details.
Battery capacity indicators
The battery pack (20) is equipped with the battery capacity indicators (20a) which
are used to give an indication of the battery pack's remaining capacity. Press the
battery capacity button (20b) to check battery capacity (Fig. 11). The LEDs will
stay lit for approximately 5 seconds.
Connect battery pack
1. Make sure the start lever (3) is released and safety switch button (2) is not
pressed.
2. Attach the battery pack (20) to the product. Ensure it snaps in place.
3. Insert the safety key (10) into the slot fully.
4. Your product is now ready to be used.
MNL_MLM1834-Li_18V 34cm Lawnmower_IM_GB_V1_211009.indd 21
20
20b
20a
Fig. 11
Before you start
76-100%
51-75%
26-50%
5-25%
<5%
EN
21
10/9/21 10:58 AM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SOLO MLM1834-Li and is the answer not in the manual?
Questions and answers
When moving the lower hand;es to mid point, the left clamp,5, will not engage. How can I correct this?
To fix the left clamp on the Mac Allister SOLO MLM1834-Li when moving the lower handles to the midpoint, follow these steps:
1. Loosen the Clamp Lever: Turn the clamp lever (5) anti-clockwise on both sides of the lower handle bars (6), but do not remove them.
2. Adjust the Handle Position: Hold and swing the handle assembly gently to the midpoint position by aligning the indication line (6a) with the indicator (8a) of the transport handle (8).
3. Secure the Clamp Lever: Fold up the clamp lever (5) towards the transport handle (8).
- If the clamp cannot be folded, loosen it further and try again.
- If it is too loose, tighten it by turning the clamp lever (5) clockwise.
Ensure both sides of the handle assembly are set to the same height.
This answer is automatically generated