Related Manuals for Mac allister MLM1841
Summary of Contents for Mac allister MLM1841
- Page 1 Lawnmower 1800W 41cm MLM1841 WARNING: Read the instructions before using the product!
-
Page 2: Table Of Contents
Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. started... Getting Safety information Your product Before you start detail... more Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Technical specifications... - Page 3 MLM1841 by MacAllister Safety information Safety warnings 1. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
- Page 4 Safety information MLM1841 by MacAllister Safety warnings 3. Never mow while people, especially children, or pets are nearby. 4. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
- Page 5 MLM1841 by MacAllister Safety information 3. Always be sure of your footing on slopes. 4. Walk, never run. 5. Mow across the face of slopes, never up and down. 6. Exercise extreme caution when changing direction on slopes. 7. Do not mow excessively steep slopes.
- Page 6 Safety information MLM1841 by MacAllister Safety warnings - before checking, cleaning or working on the product, - after striking a foreign object. Inspect the product for damage and make repairs before restarting and operating the product; 18. If the product starts to vibrate abnormally (check...
- Page 7 MLM1841 by MacAllister Safety information 9. Replace worn or damaged parts for safety. Use only genuine replacement parts and accessories. 10. Wear strong work gloves when removing and reassembling the cutting blade. 11. Have the product repaired only by an authorised service centre or similar qualified specialist.
-
Page 8: Safety Information
Safety information MLM1841 by MacAllister Safety warnings Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards. - Page 9 MLM1841 by MacAllister Safety information WARNING! This product produces electromagnetic field during operation! This field may under some circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their...
- Page 10 Safety information MLM1841 by MacAllister Symbols Wear protective, slip-resistant footwear. Wear tight-fitted protective clothes. Switch the product off and disconnect the plug from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. Mow across the face of slopes, never up and down.
- Page 11 MLM1841 by MacAllister Safety information Guaranteed sound power level value in 94 dB. The product is of Protection class II. That means it is equipped with enhanced or double insulation. WEEE symbol. Waste electrical products should not be disposed of with household waste.
-
Page 12: Your Product
Your product MLM1841 by MacAllister Your product 2 2a... - Page 13 MLM1841 by MacAllister Your product / Before you start 1. Safety switch button e. Hatch* c. Cutting blade 2. Grip handle 8. Lower handle bar (x2) d. Hex nut a. Cord retainer a. Indication line (x3)* 14. Front wheel (x2) 3.
-
Page 14: Before You Start
Before you start MLM1841 by MacAllister You will need (items not supplied) (items supplied) Suitable personal protective equipment Grass catcher (7) Suitable wrench Cutting blade (13c) Mulching insert (20) NOTE: The accessories required depend on the intended application. Ask your dealer for advice. - Page 15 MLM1841 by MacAllister Before you start Fig. 1 Fig. 2 Fig. 1 Fig. 2 Fig. 1 Fig. 2 NOTE: For first assembly, secure the handle assembly with the clamp lever (10) in the middle position of the tilt adjustment mechanism by aligning the indication line (8a) with the indicator (9a) of transport handle (9).
- Page 16 Before you start MLM1841 by MacAllister Assembly Grass catcher 1. Clip the three rubber clips (7c) to the supporting rod (7d) of the grass catcher (7) (Fig. 5). 2. The carry handle (7a) is already preassembled on the top cover (7b) and its position is rotatable to fit the intended use (Fig.
- Page 17 MLM1841 by MacAllister Before you start NOTE: Always carry the grass catcher (7) by its handle (7a). Before hooking the grass catcher (7), check if the mulching insert (20) is in the rear discharge chute (19). Take away the mulching insert (20) before hooking the grass catcher (7).
- Page 18 Before you start MLM1841 by MacAllister Connection to power supply WARNING! Check the voltage! The voltage must comply with the information on the rating label! If using an extension cord it must be suitable for outdoor use with sockets protected against water splashing.
-
Page 19: In More Detail
MLM1841 by MacAllister more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Technical specifications Declaration of conformity... - Page 20 Product functions MLM1841 by MacAllister Intended use This electric lawnmower MLM1841 is designated with a rated power input of 1800 Watts. The product is intended for mowing grass in domestic gardens only. It must not be used to mow unusually high, dry or wet grass, e.g. pasture grass, or to shred leaves.
- Page 21 MLM1841 by MacAllister Product functions Fig. 10 Fig. 10 Fig. 10 Cutting height adjustment WARNING! Switch the product off and wait that the cutting blade had come to a complete stop before adjusting the cutting height! Disconnect the plug from the power supply before adjusting the cutting height! Adjust the cutting height according to the needs of your lawn.
-
Page 22: Operation
Product functions MLM1841 by MacAllister Grass catcher WARNING! Do not attempt to use the product without the grass catcher attached when collecting grass – danger of flying objects! Switch the motor off and wait that the blade had come to a complete stop before removing the grass catcher! Attach the grass catcher (7). - Page 23 MLM1841 by MacAllister Product functions 3. Remove the grass clippings from the rear discharge chute (19) into the grass catcher (7). Use a proper tool such as a brush. 4. Remove the grass catcher by its carry handle (7a). 5. Empty the grass clippings onto a compost heap.
- Page 24 Operation MLM1841 by MacAllister General operation 1. Check the product as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. Take care of any problem you find or have the product checked by qualified specialist.
- Page 25 MLM1841 by MacAllister Operation Ensure the extension cord is well hooked on the cord retainer (2a). Connect the plug to the power supply via the extension cord. 1. Stand behind the grip handle (2). 2. While holding the safety switch button (1) pressed (Fig. 16, step 1), pull the start levers (3) towards the grip handle (2) (Fig.
- Page 26 Operation MLM1841 by MacAllister Mowing 7. Pay special attention when changing direction. 8. Empty the grass catcher (7) regularly. WARNING! If the product strikes a foreign object stop immediately! Let the product cool down and thoroughly inspect the product for damage!
- Page 27 MLM1841 by MacAllister Operation / Care and maintenance stick, remove any accumulation of grass in the blade area. Be careful of the sharp edges of the blade. Clean often after cutting new grass and after every use. 5. Certain types of grass or grass conditions may require an area to be mulched a second time to fully disperse the grass across the lawn.
-
Page 28: Care And Maintenance
Care and maintenance MLM1841 by MacAllister General Cleaning NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces. 3. Check for any damage and wear. Repair damages in accordance with this instruction manual or take it to an authorised service centre before using the product again. - Page 29 MLM1841 by MacAllister Care and maintenance 6. Replace this cutting blade after 50 hours mowing or 2 years whichever is sooner regardless of condition. If the cutting blade is cracked or damaged, you must immediately replace it with a new one.
- Page 30 Care and maintenance MLM1841 by MacAllister UK plug (only for UK market) If you need to replace the fitted plug, then follow the instructions below. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue –...
-
Page 31: Troubleshooting
MLM1841 by MacAllister Care and maintenance / Troubleshooting Storage 1. Switch the product off, disconnect the plug from the power supply before storage. 2. Clean the product as described above. 3. Fold the handle assembly to the storage position. 4. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place. - Page 32 Troubleshooting MLM1841 by MacAllister Troubleshooting Problem Possible cause Solution 1. Product does 1.1. Not connected to power 1.1. Connect to power supply not start supply 1.2. Power cord or plug is 1.2. Check by a specialist defective electrician 1.3. Other electrical defect to 1.3.
-
Page 33: Recycling And Disposal
MLM1841 by MacAllister Recycling and disposal Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk. -
Page 34: Guarantee
Guarantee MLM1841 by MacAllister Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use. - Page 35 MLM1841 by MacAllister Guarantee Distributor: B&Q plc Chandlers Ford, Hants, SO53 3LE, United Kingdom www.diy.com Screwfix Direct Limited Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom www.screwfix.com...
-
Page 36: Technical Specifications
Technical specifications MLM1841 by MacAllister Technical specifications General > Rated voltage, frequency : 230-240 V~,50 Hz > Rated power input : 1800 W > Rated no load speed n : 3700 min > Max. cutting width : 41 cm > Cutting height range : 20-70mm, 7 levels >... - Page 37 Proper measures include among others regular maintenance and care of the product and accessories, keeping hands warm, periodical breaks and proper planning of work processes. Rating label explanation Lawnmower: MLM1841 = Model number M = MAC Allister LM = Lawnmower 18 = Rated power (1800 W)
-
Page 38: Declaration Of Conformity
Declaration of conformity MLM1841 by MacAllister Declaration of conformity...
Need help?
Do you have a question about the MLM1841 and is the answer not in the manual?
Questions and answers
Have you any photos that show switch assembly, my daughter removed the cover on her lawn mower and not sure if she has lost a part but doesn’t assemble correct
Has anyone a photo or diagram of switch assembly for Mac MLM1841
The document mentions figures (e.g., Fig. 3, Fig. 4, Fig. 5, Fig. 6) related to assembly and components of the Mac Allister MLM1841, but it does not explicitly confirm the presence of a photo or diagram of the switch assembly.
This answer is automatically generated
Does anyone know the size of the nut that secures the cutting blade on an MLM1841?