Device Address; Remote Operation; Operating Via Simatic Pdm - Siemens SITRANS L Operating Instructions Manual

• Use UP
feature becomes active.
• To move a cross-hair, press RIGHT
decrease.
• To Zoom into an area, position the intersection of the cross-hairs at the center of that
area, select Zoom, and press RIGHT
• To update the profile, select Measure and press RIGHT
• To return to the previous menu, select Exit then press RIGHT
6.2.9

Device address

The unique address of the device on the network (also called PROFIBUS address).
Values
Default
1. In PROGRAM mode, navigate to Level Meter > Communication (5.) > Device address
(5.1.)
2. Press RIGHT arrow
3. If required, key in a new value and press RIGHT arrow
new value.
4. Press Mode
6.3

Remote operation

6.3.1

Operating via SIMATIC PDM

SIMATIC PDM is a software package used to commission and maintain SITRANS LR200 and
other process devices. Please consult the operating instructions or online help for details on
using SIMATIC PDM. You can find more information at www.siemens.com/simatic-pdm
(www.siemens.com/simatic-pdm).
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
or DOWN arrow to scroll to an icon. When an icon is highlighted, that
0-126
126
twice to open parameter view and enable Edit mode.
to return to Measurement mode.
arrow to increase the value, LEFT
arrow. Press LEFT
arrow.
to accept it. The LCD displays the
Operating
6.3 Remote operation
arrow to
arrow to Zoom out.
arrow.
55