Speedlink Gravity Carbon RGB - 2.1 Subwoofer System Manual

GET STARTED

** THE USB PORTS ARE STRICTLY FOR CONNECTING THE INCLUDED SATELLITES.

SWITCH CONNECTION

1. Press 'BT' once to switch to audio input mode. The power LED is lit permanently.
   You can now transmit the audio signal via the audio cable to the GRAVITY CARBON RGB.
2. Press 'BT' once again to switch back to Bluetooth* mode. The power LED starts blinking.

BLUETOOTH* PAIRING

1. Activate the Bluetooth* mode.
2. Press and hold the 'BT' button for about 5 seconds to activate pairing mode. The power LED blinks fast.
3. Open the Bluetooth* menu on your smartphone/tablet/Bluetooth*-capable device and scan for new devices.
4. Pair your device with 'Speedlink GRAVITY CARBON RGB'.
5. The connection will be established. The power LED blinks slowly.
6. The connection between the devices will automatically be re-established, when the Bluetooth* connection is reactivated on the GRAVITY CARBON RGB and your smartphone/tablet/Bluetooth*-capable device.

AUTO STANDBY MODE

1. The auto standby mode is activated by default. The power LED is lit in purple.
2. The speakers turn into standby after 1 hour without receiving a signal.
3. Switch off auto standby mode by pressing 'Eco' once. The power LED is now lit in blue.
4. Switch on auto standby mode by pressing 'Eco' once again. The power LED is now lit in purple.

COLOUR MODES

1. RUNNING
2. MULTICOLOUR STATIC
3. BREATHING
4. SINGLE COLOUR STATIC
5. WITH THE BEAT
6. OFF

You can adjust the modes by pressing the 'LED' switch repetitively until the desired mode is selected.
Please note: The 'Single Colour Static' mode is selected by choosing a lit colour in 'Breathing' mode and then pressing the switch; the chosen colour remains unchanged until the switch is pressed again.
Likewise, the 'Multicolour Static' mode results from the 'Running' mode.
The 'With the Beat' mode creates effects that match the currently played music; it only performs when the music is not paused or stopped; the higher the volume is set on the output device, the faster the effects will shine.

Technical support: www.speedlink.com

Safety instructions: www.speedlink.com

WEEE: Dispose the product at a recycling point. Do not dispose together with household waste. Incorrect storage/ disposal can harm the environment and/or cause injury.

Speedlink declares that this product complies with the directives listed in the section 'Conformity notice'.

INTENDED USE

This product is intended to be used as a speaker system for connecting to a computer/other audio source and is for indoor home/office use only. It contains no user-serviceable parts. Do not disassemble it and stop using it immediately if damaged. Jöllenbeck GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless or improper use or for purposes for which it is not intended.

Please keep this information for later reference.

CONFORMITY NOTICE

IMPORTER/MANUFACTURER:
Jöllenbeck GmbH
Kreuzberg 2
27404 Weertzen
GERMANY

Phone: +49 4287 9244-0

PRODUCT DETAILS:
Product no.: SL-830100-BK
Type description: GRAVITY CARBON RGB 2.1 Subwoofer System, black

THE PRODUCT COMPLIES WITH THE FOLLOWING DIRECTIVES:
RED 2014/53/EU
RoHS 2011/65/EU

For a full declaration of conformity, please contact us at www.speedlink.com/en/contact

Further information: www.speedlink.com

© 2020 Jöllenbeck GmbH. All rights reserved. Speedlink, the Speedlink word mark and the Speedlink swoosh are registered trademarks of Jöllenbeck GmbH.
* Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. The Instagram logo is a registered trademark/service mark of Instagram LLC. The Facebook logo is a registered trademark of Facebook Inc. The Twitter logo is a registered trademark of Twitter Inc. The YouTube logo is a registered trademark of YouTube LLC. All trademarks are the property of their respective owner. Technical specifications are subject to change. Please keep this information for later reference.

www.speedlink.com