Using The Signal Test Button - Nokia FastMile 3.2 User Manual

Troubleshooting
See
number of lit LEDs indicate the signal strength. For example, three means a very
strong signal.

Using the signal test button

You can check and test the signal strength at any time by pressing the signal test
button on the side of the FastMile 5G Gateway 3.2 to check the LEDs and perform
corrective actions.
Figure 60
Note: Once you have a good 4G/LTE or 5G connection, it is recommended that you do not
relocate or rotate your device. It is strongly recommended that you position your device near
a window, where the best 4G/LTE or 5G signal is expected.
However, the omni-directional antenna is less susceptible to Internet speed changes when
rotating the device since it does not have a directional antenna.
Rotating your device may still influence the Internet speeds due to indoor signal reception
conditions.
82
Understanding the LED colors
Location of signal test button
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
for a description of the signal strength LED. The
User Guide
3TG-02292-AAAA-TCZZA-02