Inserting The Sim Card - Nokia FastMile 3.2 User Manual

Setting up the FastMile 5G Gateway 3.2
Note: For eSIM use, a user profile must be installed on the device, which can only be done
in the factory, based on the activation code provided by operator. Without the user profile,
the eSIM is empty and can not be used.
Note: For the device equipped with eSIM, it supports both a primary and secondary SIM
card (uSIM or eSIM). The uSIM is considered the primary SIM card; the eSIM is considered
the secondary SIM card. If the uSIM card is inserted, the uSIM card will be used. If the uSIM
card is removed, the eSIM card will be used.
The SIM card is normally provided by the network service provider or operator, and
may be installed already. If the device is already installed with a SIM card (uSIM or
eSIM), proceed to

Inserting the SIM card

Note: The FastMile 5G Gateway 3.2 requires an appropriate 4FF/nano-size SIM card to
connect to 4G/5G network. The gateway might also not start as expected without a SIM
card.
For PIN-locked SIM cards, you will need to enter a PIN number. For PIN-blocked SIM cards,
you will need to enter a PUK and a PIN number. See
Turn the FastMile 5G Gateway 3.2 upside down.
Figure 6
18
Identifying the ideal
Removing the SIM card tray
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
location.
Unlocking or unblocking your SIM
User Guide
card.
3TG-02292-AAAA-TCZZA-02