The Control Panel; Changing A Programme - Sharp QW-AT13S47E-DE User Manual

7. THE CONTROL PANEL

Press the Power On/Off button (1), the
Start/Pause light (6) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button (4).
Additional functions (2, 3) can also be
selected.
NOTE: Press the Extra Hygiene button
(2) to change the washing temperature and
durations during respective cycles, ensuring
more hygienic washing.
NOTE: Press the Tablet Detergent
button (3) when using a combined
detergent that contains salt, rinse aid or
other extras.
NOTE: Press the Half Load button (5)
to reduce the duration of a programme, and
therefore decrease your energy and water
consumption.
NOTE: If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. If you do not want to
use this feature on the newly selected wash
programme, press the feature button until
the light on the button switches off.
Press the Start/Pause button (6) to start
the selected programme. The light on the
Start/Pause button will switch off and the
Wash light (8) will illuminate. If the door of
your machine is opened while a programme
is operating, the Start/Pause light (6) will
flash.
The Wash, Dry and End lights (8) on the
Control Panel indicate the status of the
programme in operation. The machine will
remain silent for 40 to 50 minutes while the
Drying light is on.
The Remaining Time Indicator (9) displays
the programme times and the time
remaining of the programme in operation.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator (7) will illuminate indicating the salt
chamber needs filling.
NOTE: When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
(7) will illuiminate to indicate the rinse aid
chamber needs filling.
Delaying a Programme
Press the "+" and "-" buttons on the
Remaining Time Indicator to adjust
the programme delay time before the
programme starts. To change the delay
time, first press the Start/Pause button, then
use the "+" and "-" buttons to select a new
delay time. To activate the new delay time,
press the Start/Pause button.

7.1. Changing a Programme

Follow the steps below to change a
programme while in operation.
Pause button once.
EN - 18
Press the Start/