Table of Contents
Advertisement
Operation
Vapour extraction
The vapour extraction will switch itself
on automatically if there is an item of
cookware on a cooking zone and a
power level has been set for that zone
(Con@ctivity). The power level for va-
pour extraction is set to suit the power
level of the cooking zone. The run-on
time and level depend on the power
level of the vapour extraction.
You can deactivate Con@ctivity tempor-
arily or permanently. To deactivate
Con@ctivity permanently, see "Pro-
gramming". If Con@ctivity is perman-
ently deactivated, the sensor control
will no longer be illuminated.
The power level of the vapour extraction
can be manually altered at any time.
Power levels 1 to 3 and a Booster level
are set as standard. The power levels
can be extended to 1 to 9 and a
Booster level, see "Programming".
For light to heavy cooking vapours and
odours, select from power levels 1 to 3
(9 with the extended power levels). For
short periods of very strong vapours
and odours, e.g. whilst searing meat,
select the B Booster setting.
If the vapour extraction starts with
power level 1, the power is automatic-
ally increased to level 2 for
20 seconds. The increase in power is
necessary in order to ensure that the
flap opens in extraction mode. If you
are using the vapour extraction in re-
circulation mode, you can deactivate
this automatic function, see "Program-
ming".
44
Tip: To help release vapours effectively
with pans over 15 cm high, place a
wooden spoon between the lid and the
pan.
Hide quick links:
Advertisement
Table of Contents
