Powering Off The System; Putting The System To Sleep; Waking Up The System; Initiating Meet Now Conferences - Yealink MeetingEye 400 User Manual

Powering off the System

1. Long press the Hang up key for 3s.
The option pops up on the display.
2. Select Shut down.
The system shuts down immediately, and the LED on the system goes out.

Putting the System to Sleep

You can put the system to sleep immediately if you do not use it temporarily.
1. Long press the Hang up key for 3s.
The option pops up on the display.
2. Select Sleep.
The system goes to sleep immediately, and the LED on the system or the camera glows red.

Waking up the System

On your remote control, press any button.

Initiating Meet Now Conferences

When you register a YMS account, you can initiate a Meet Now conference at any time, without any
reservation. Contact your administrator to check whether the Meet Now conference is enabled for your
account.
Select Meeting Now > Meeting Now.
When the Meet Now conference has started, you can invite other participants to join the conference, or
participants can join the conference by dialing the conference number you shared.
Related tasks
Inviting Participants

Joining Conferences

This chapter introduces how to join YMS conferences.

Joining Scheduled Conferences

After registering a YMS account on VCS devices, the conference you reserve on the server will be pushed
to the VCS device synchronously. You can join the scheduled conference in advance.
• If you are invited to a YMS conference, you can see the conference schedule on the idle screen and join
the conference 30 minutes before the conference begins.
Note: If multiple devices (with the same YMS account registered in) join the same conference,
the former joined device will exit the conference automatically once another device joins. The
conference only allows one of them to join the conference.
| Initiating Meet Now Conferences | 25