GAC MOTOR EMPOW Manual page 138

4. Operation of systems and equipment
Air circulation (automatic A/C) *
Recirculation mode
Press the button , and when the button
indicator lamp is on, the air circulation enters
the recirculation mode.
When the quality of outside air is poor, use this
mode to prevent the outside air from entering
the vehicle and recirculate the inside air.
Fresh air mode
Press the button , and when the key
indicator lamp goes out, the air circulation
enters into the fresh air mode.
When the quality of outside air is good, use
this mode to bring the fresh outside air into the
vehicle.
132
Recirculation mode (manual A/C) *
Press the button , and when the button
indicator lamp is on, the air circulation will
enter the recirculation mode.
When the quality of outside air is poor, use this
mode to prevent the outside air from entering
the vehicle and recirculate the inside air.
Fresh air mode (manual A/C)
Press the button , and when the button
indicator lamp is on, the air circulation will
enter the fresh air mode.
When the quality of outside air is good, use
this mode to bring the fresh outside air into the
vehicle.
CAUTION
● Long-term recirculation mode will cause
accumulation of carbon dioxide in
the vehicle, which is not conducive to
keeping driver clearheaded.
● The recirculation mode in cold or rainy
days can easily cause the windows to
mist up, affecting the driver's visibility
and probably causing serious accidents.
Dual zone mode (automatic A/C) *
Press the SYNC button, and when the button
indicator lamp is on, the A/C system will enter
the single zone control mode. The temperature
control knob on the A/C system control panel
can control the temperature on both sides of
driver and passenger.
Click the SYNC button again, the button
indicator lamp goes out, the air conditioner
enters the dual zone control mode, and the
temperature in the left and right areas is
controlled independently.