1. Manuals
  2. Brands
  3. GAC MOTOR Manuals
  4. Automobile
  5. Trumpchi
  6. Owner's manual

GAC MOTOR Trumpchi Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Foreword
Thanks for choosing Trumpchi manufactured by GAC Motor Co., Ltd. (hereinafter referred to as "GAC Motor"). For a better driving pleasure, please
read the Owner's Manual carefully. Through this manual, you can fully understand the operation methods and precautions of the vehicle. Proper
operation of the vehicle can improve driving safety and prolong the service life of the vehicle.
The Warranty Manual supplied with the vehicle clearly describes the warranty services provided by GAC Motor and the regular maintenance of the
vehicle. Please read this manual carefully to know your rights and responsibilities.
After reading this manual, please store it with the vehicle for future reference.
In case of any doubts about this manual, please contact the GAC Motor authorized shop for detailed explanation.
If you have any suggestions or recommendations, please contact GAC Motor through the customer service hotline: +86-400-158-9999.
We are grateful for your support and love for Trumpchi. Have a nice drive!
GAC Motor Co., Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Trumpchi and is the answer not in the manual?

Questions and answers

Waleed
March 1, 2025

What’s the transmission oil for GA6 2017

0
1 comments:
Mr. Anderson
March 1, 2025

The transmission oil for the GAC MOTOR Trumpchi GA6 2017 is Shell Spirax S5 DCT 12 Plus.

This answer is automatically generated

0
mark Kinney
March 8, 2025

How can I raise the high beam lights? They are as low as the low beam.

0
1 comments:
Mr. Anderson
March 8, 2025

To adjust the high beam lights on a GAC MOTOR Trumpchi, follow these steps:

1. Ensure the vehicle power is in the "ON" position.
2. In the AV system, navigate to “Settings → Body accessories → Exterior light → IHC.”
3. Click the soft key on the right side of “IHC” to turn on the Intelligent High Beam Control (IHC).
4. When IHC is activated, the system will automatically switch between high and low beams based on vehicle speed, traffic conditions, and lighting.
5. The high beam indicator will be blue when the high beam is on.
6. The system will switch to low beam automatically when it detects an oncoming vehicle or if a vehicle ahead is too close.

To deactivate IHC, turn the lamp switch to a different position.

This answer is automatically generated

0
Олег
April 14, 2025

Какое трансмиссионное масло подходит для GAC trumptich gs4 2018 и как его заменить?

0

Related Manuals for GAC MOTOR Trumpchi

Summary of Contents for GAC MOTOR Trumpchi

  • Page 1 Foreword Thanks for choosing Trumpchi manufactured by GAC Motor Co., Ltd. (hereinafter referred to as “GAC Motor”). For a better driving pleasure, please read the Owner’s Manual carefully. Through this manual, you can fully understand the operation methods and precautions of the vehicle. Proper operation of the vehicle can improve driving safety and prolong the service life of the vehicle.
  • Page 2 Safety Instructions The safety of you and the passengers is Safety instructions are available in many forms, including: crucial, so driving safely is an important ● Safety signs - pasted on the vehicle. responsibility of the driver. Safety notes - the texts marked with “WARNING”, “CAUTION”, or “NOTE” in front. ●...

  • Page 3: Table Of Contents

    Table of contents 1. Important safety precautions ......1 3.6 Safety label ............34 4. Operation of systems and equipment ... 35 2. Picture index ............3 4.1 Cab ..............35 2.1 Exterior ..............3 4.1.1 Steering wheel ........35 2.2 Interior ...............6 4.1.2 Instrument cluster ........
  • Page 4 Table of contents 4.3.5 Rearview mirror ........82 4.6.6 Child seat with smart Bluetooth* ....114 4.3.6 Sun visor ..........85 4.6.7 Settings ..........115 4.4 Seats and storage facilities ......86 4.7 Emergency rescue ........119 4.4.1 Headrest ..........86 5. Driving guide ..........120 4.4.2 Front seat ..........
  • Page 5 Table of contents 5.4.4 Traffic sign recognition (TSR)* ....160 6.4 Inspecting and adding oils ......200 5.4.5 Intelligent speed limiter adaptive cruise control 6.4.1 Fuel ............200 (ISL-ACC)* ..........162 6.4.2 Engine oil ..........202 5.4.6 Lane departure warning (LDW)* ... 163 6.4.3 Coolant ..........
  • Page 6 Table of contents 8.4 Replacement of flat tire ........238 8.5 Fuse ...............242 8.6 Emergency start ..........244 8.7 Vehicle towing ..........246 8.8 Vehicle out of trap ..........248...

  • Page 7: Important Safety Precautions

    1. Important safety precautions 1. Important safety precautions Be sure to wear the seat belt correctly Never drink and drive ◆ ◆ The seat belt is the best protection device in the event of a Drinking alcohol, even a little, will reduce your response capability, collision.
  • Page 8 EDR data disclosure This vehicle is equipped with an event data recorder (EDR). The EDR Except for the following circumstances, GAC Motor will not disclose is mainly designed to record data in the event of certain collisions the data recorded in the EDR to third parties: (such as airbag deployment or collision with a barrier), so as to help ●...

  • Page 9: Picture Index

    2. Picture index 2. Picture index 2.1 Exterior ① Front combination lamp Turning on lamps => See page 71 Replace bulbs => See page 214 F r o n t c o m b i n a t i o n l a m p b u l b specifications =>...
  • Page 10 2. Picture index ① Rear combination lamp Rear combination lamp bulb specifications => See page 229 ② High-mounted stop lamp High-mounted stop lamp specifications => See page 229 ③ Fuel tank cover => See page 200 ④ Liftgate unlocking button => See page ⑤ Rear fog lamp and reverse lamp Rear fog lamp specifications =>...
  • Page 11 2. Picture index ① Engine coolant reservoir => See page ② Intercooler coolant expansion tank => See page 206 ③ Oil filler cap => See page 204 ④ Brake fluid reservoir => See page 211 ⑤ Battery => See page 212 ⑥ Engine compartment power distribution unit =>...

  • Page 12: Interior

    2. Picture index 2.2 Interior ① Steering wheel => See page 35 Steering wheel button => See page 36 Driver’s frontal airbag => See page 18 ② Sun visor => See page 85 ③ Front dome lamp => See page 77 Electric sunshade button * =>...
  • Page 13 2. Picture index ① Inside handle => See page 52 ② A/C air outlet => See page 105 ③ Light combination switch => See page ④ Instrument cluster => See page 37 Indicator lamp => See page 43 ⑤ Wiper combination switch =>...
  • Page 14 2. Picture index ① Instrument panel left switch block Exterior rearview mirror folding button * => See page 84 Exterior rearview mirror adjusting button => See page 83 ALS knob => See page 75 Liftgate button => See page 60 ②...
  • Page 15 2. Picture index ① Hazard warning lamp switch button => See page 76 ② ENGINE START/STOP button => See page 120 ③ “P” position button => See page 123 ④ Gearshift lever => See page 123 ⑤ EPB button =>...

  • Page 16: Instructions For Safe Operation

    3. Instructions for safe operation 3. Instructions for safe operation 3.1 Safe driving The following inspections must be carried out WARNING before driving: 3.1.1 General description Check that all lamps are working properly. W h e n i n s t a l l i n g t h e d r i v e r ’s f l o o r Check that the fuel level is normal.

  • Page 17: Correct Sitting Posture Of The Driver And Passengers

    3. Instructions for safe operation 3.1.2 Correct sitting posture of Correct sitting posture of the passengers WARNING the driver and passengers To guarantee the safety of the passengers and reduce the risk of casualties, the passengers ● It is forbidden to install a child safety Correct sitting posture of the driver should: seat in the front passenger’s seat.

  • Page 18: Seat Belt

    3. Instructions for safe operation 3.2 Seat belt In a car collision, the seat belts assist other Consequences of not fastening the seat belt safety systems in simultaneously absorbing the energy generated by the collision, further 3.2.1 Why must you fasten the reducing the injuries suffered by the driver and seat belt passengers.
  • Page 19 3. Instructions for safe operation Even if the vehicle speed is very low, the force Rear passengers must also fasten the seat acting on the human body in the event of a belts correctly, otherwise they will be thrown collision is so great that the occupant cannot forward when an accident occurs.

  • Page 20: Seat Belt

    SRS is failed. In that case, the alarm message appears as follows: ● If the alarm remains on after the seat please go to the GAC Motor authorized shop when the vehicle speed is lower than 20 belt is fastened correctly, it means that for inspection in time.
  • Page 21 GAC Motor authorized shop her to maintain a correct sitting posture to for replacement. NOTE prevent the body from leaning forward.
  • Page 22 3. Instructions for safe operation Unfastening the seat belt Pregnant women must fasten the seat belts WARNING correctly To reduce the risk of injury during emergency braking or accidents, please observe the following precautions: ● Before driving, make sure that all occupants have properly fastened the seat belts.

  • Page 23: Srs

    3. Instructions for safe operation 3.3 SRS Depending on vehicle configurations, the deployment positions of the SRS are as shown below: ① Front seat frontal airbags. ② Front seat side airbags * ③ S i d e c u r t a i n a i r b a g s ( b i l a t e r a l l y symmetrical) * NOTE The airbag will produce a little harmless...
  • Page 24 A system fault is indicated when the GAC Motor authorized shop for indicator lamp is in the following conditions: replacement. The indicator lamp does not come on after ● W h e n t h e S R S i s f a u l t y, p l e a s e...
  • Page 25 3. Instructions for safe operation In the event of a frontal collision which is The front seat frontal airbags might not be severe enough to meet the triggering condition triggered in the following cases: of frontal airbag, the frontal airbags will be The vehicle power switch set to “ACC”...
  • Page 26 3. Instructions for safe operation Front seat side airbag* The front seat side airbags might not be WARNING triggered under any one of the following: The vehicle power switch set to “ACC” or ● Airbag warning label is provided on “OFF”...
  • Page 27 3. Instructions for safe operation Side curtain airbag* The side curtain airbags might not be triggered in the following cases: The vehicle power switch set to “ACC” or “OFF” position. 100% frontal collision. Minor side collision. Rear-end collision. Other special circumstances. NOTE The word “minor”...

  • Page 28: Cases Where The Airbags May Deploy

    3. Instructions for safe operation 3.3.1 Cases where the airbags may deploy Hitting of nose to the ground after crossing a deep groove. Collision with roadside protrusions, curbs, etc. Hitting of nose to the ground after running down a steep slope.

  • Page 29: Cases Where The Airbags Might Not Deploy

    3. Instructions for safe operation 3.3.2 Cases where the airbags might not deploy Collision with concrete pillars, trees or other elongated objects. Rear-end collision with the lower rear end of large truck. Rear-end collision by other vehicles. Offset frontal collision with a wall or another vehicle Rollover.

  • Page 30: Safe Ride Of Children

    3. Instructions for safe operation 3.4 Safe ride of children WARNING WARNING 3.4.1 General description ● Do not install any rear-facing child ● Never leave children alone in the The child must sit in a rear seat (2nd row), and restraint system on seats with frontal vehicle! a suitable child safety seat should be selected...

  • Page 31: Child Safety Seat

    3. Instructions for safe operation 3.4.2 Child safety seat Classification of child safety seats (for reference only): Group 0/0 + child safety seat: Suitable for infants weighing less than 13kg. Group I child safety seat: Suitable for toddlers weighing between 9kg and 18kg.
  • Page 32 3. Instructions for safe operation Group I child safety seat Welldon Angela 2nd Generation, product model: WD002-ZJC. Precautions for installation: Adjustment of seat body: Rear-facing seat is recommended. Adjust the seat body to make it upright. (almost vertical) state. A d j u s t m e n t o f h e a d r e s t : I t i s recommended that the headrest be flush with the shoulder of the child.

  • Page 33: Information About Child Safety Seat

    3. Instructions for safe operation 3.4.3 Information about child safety seat Information about the applicability of different seating positions for child restraint systems: Mounting position Mass group Front passenger's seat Outboard 2nd-row seats 2nd-row center seat Group 0: <10kg Group 0+: <13kg U/UF Group I: 9~18 kg U/UF/L Group II: 15~25 kg Group III: 22~36 kg Note: The uppercase letters in the table are defined as follows: U= The “general”...
  • Page 34 3. Instructions for safe operation ISOFIX mounting positions for ISOFIX child safety seats Mounting position Mass group Size class Fixture module Outboard 2nd-row Front passenger's seat 2nd-row center seat seats Carry-cot ISO/L1 ISO/L2 Group 0: <10kg ISO/R1 IUF/IL ISO/R1 IUF/IL Group 0+: <13kg ISO/R2 IUF/IL...

  • Page 35: Correct Installation Of Child Safety Seat

    3. Instructions for safe operation 3.4.4 Correct installation of child Installation of child safety seat by three- point seat belt safety seat The child safety seat is generally installed by three-point seat belt, ISOFIX system, or LATCH system. To ensure a better protection effect and prevent the headrest from affecting the performance of the child safety seat during use, it is recommended to remove the headrest of the seat on which the child safety seat is installed.
  • Page 36 3. Instructions for safe operation Grasp the shoulder belt near the buckle Place the seat belt correctly and push Shake the child safety seat back and and pull it up to tension the lap belt. At this the tab up. Make sure the seat belt is not forth, left and right to make sure it is firmly time, press the child safety seat with your twisted.
  • Page 37 3. Instructions for safe operation Installing ISOFIX system Rear seat The rear seats (2nd-row) of this vehicle are Locking clip equipped with the ISOFIX system, and thus suitable for the ISOFIX child safety seats. WARNING ● The child safety seat anchorages installed in this vehicle can be used to fix the child safety seats only.
  • Page 38 3. Instructions for safe operation Thread the strap through the top of seat Put the child safety seat on the seat, open NOTE back, open the protective cover of rear the cover and find the front anchorage ① . anchorage ② , and attach the strap hook Then insert the lower guide groove of the The rear anchorage ②...

  • Page 39: Exhaust Gas Hazard

    ● When the engine is started for a long vehicle. time in a confined space (such as Please contact the GAC Motor authorized shop a garage, etc.), carbon monoxide will quickly accumulate, resulting in to check whether the exhaust system is normal...

  • Page 40: Safety Label

    Battery hazard warning warning label label If the label comes off or is difficult to read, please go to the GAC Motor authorized shop in time for replacement. NOTE In case of any discrepancy in the illustrated location or quantity of the labels, the actual vehicle shall prevail.

  • Page 41: Operation Of Systems And Equipment

    4. Operation of systems and equipment 4. Operation of systems and equipment 4.1 Cab WARNING 4.1.1 Steering wheel ● During driving, the driver’s hands should always grasp the outer ring Adjust the steering wheel position of the steering wheel (9 o’clock and 3 o’clock positions).
  • Page 42 4. Operation of systems and equipment Steering wheel button ② Control buttons of AV system => See page 106 ③ Steering wheel button: Control buttons of the instrument cluster display*: ● Instrument panel theme switching * => See page 39 ●...

  • Page 43: Instrument Cluster

    4. Operation of systems and equipment 4.1.2 Instrument cluster Instrument cluster with 7-inch display * (organic theme) ① Engine coolant temperature gauge ② Outside temperature display ③ Tachometer ④ Speedometer ⑤ Time display ⑥ Fuel gauge ⑦ Driving mode ⑧ Gear display NOTE The instrument cluster with 7-inch display allows for multiple themes, including “Global...
  • Page 44 4. Operation of systems and equipment Tachometer Engine coolant temperature gauge Fuel gauge The tachometer is used to indicate the current The engine coolant temperature gauge is The fuel gauge is used to indicate the current engine speed, in 1,000r/min. used to indicate the current temperature of the amount of fuel remaining in the fuel tank.
  • Page 45 4. Operation of systems and equipment Outside temperature display Instrument theme switching Driving information When the vehicle power switch is set to “ON” The current outside temperature is position, move up or down the “OK” button displayed on the screen. on the left of the steering wheel to switch to Odometer display information screen.
  • Page 46 4. Operation of systems and equipment Cumulative distance Vehicle status AVDC mode * Vehicle status Cumulative distance Comfort Steering wheel power assist Range 9999km Average fuel consumption 7.5L/100km Steady Driving time: 360:30h AVDC Odometer: 100000km (Press OK and hold to reset) When the vehicle power switch is set to “ON”...
  • Page 47 4. Operation of systems and equipment Fuel consumption trend * ADAS* Alarm center G-value graph Warning center Steering wheel power assist Comfort Abnormal tire pressure. Please stop the vehicle for inspection. AVDC Comfort Press “OK” to go to the next entry. On the alarm center screen, the current state When the vehicle power switch is set to “ON”...
  • Page 48 4. Operation of systems and equipment If any alarm message appears, press “OK” AV and entertainment information button on the left of the steering wheel to When the AV system is turned on, the confirm the message. Then the message current playback information will be will be displayed on the alarm center displayed on the instrument cluster.

  • Page 49: Indicator Lamp

    4. Operation of systems and equipment 4.1.3 Indicator lamp Icon Name Color Function This warning lamp will come on when the engine is not started with the vehicle power switch set to Charging system warning "ON" position; lamp This warning lamp will go out after the engine is started. If this warning lamp comes on after the engine is started, it indicates that the charging system is faulty.
  • Page 50 4. Operation of systems and equipment Icon Name Color Function If the right turn signal indicator lamp flashes alone, it indicates that the right turn signal lamp of the Right turn signal and hazard vehicle is on. Green warning indicator lamp When the hazard warning lamp switch is pressed, the left/right turn signal indicator lamps and all turn signal lamps will flash simultaneously. If the red indicator lamp flashes, it indicates that the EPB is engaged partially or faulty.
  • Page 51 If the yellow indicator lamp comes on, it indicates that the LDW system is faulty. In that case, Yellow LDW status indicator lamp* please go to the GAC Motor authorized shop for inspection in time. If the blue indicator lamp comes on, it indicates that the LDW system is working normally or Blue intervenes with the steering wheel for deviation correction.
  • Page 52 You should read carefully and understand the meaning of each indicator lamp and warning lamp. In case of failure, please go to or contact the GAC Motor authorized shop in time to repair the vehicle.

  • Page 53: Vehicle Locking And Unlocking

    If you need to re-customize the key, control key. the remote control key is deactivated, please inform the GAC Motor authorized shop of you can try to press the buttons on the the key barcode. If the key barcode is missing,...
  • Page 54 4. Operation of systems and equipment Button operations ① Button operations NOTE Press the button once within the effective range, so that all doors will be locked; if ● When the door is locked, the turn signal this button is pressed and held, the doors lamp flashes once; the horn will sound windows and sunshade will be closed once;...
  • Page 55 4. Operation of systems and equipment ② Button operations ③ Button operations NOTE Press and hold the button for a short time If the vehicle has the PLG function, two once within the valid range to unlock all presses on the button within the effective ● When the doors are unlocked, the doors;...
  • Page 56 If you need to replace the battery, engine. it is recommended to go to the GAC Motor ● To remotely stop the engine, keep the authorized shop for the replacement. key within the effective range. Otherwise the unlocking function may be triggered CAUTION and then the engine cannot be started.

  • Page 57: Emergency Mechanical Key

    4. Operation of systems and equipment 4.2.2 Emergency mechanical key Emergency mechanical key Use a slotted screwdriver wrapped by Remove the transparent trim cover ⑤ . cloth to pry open the chrome plated Use a slotted screwdriver wrapped by housing of the remote control key at cloth to pry open the housing of the positions (arrows A and B) in the direction Press the lock button ①...

  • Page 58: Door Lock System

    4. Operation of systems and equipment 4.2.3 Door lock system Door inner handle NOTE Central locking button When the child safety lock is activated => See page 54, even if the rear door latch is unlocked, the inside handle cannot open the rear door.
  • Page 59 4. Operation of systems and equipment Door lock hole Lock Unlock Extend the handle of the mechanical key. Insert the emergency mechanical key into the driver’s door lock hole. Remove the emergency mechanical key. Turn the handle of the mechanical key =>...
  • Page 60 4. Operation of systems and equipment Mechanical child safety lock * Electronic child safety lock * NOTE Electronic child safety lock button is integrated with rear passenger’s window locking function. After the electronic child safety lock is activated, the rear passenger’s power window control button cannot effectively operate the corresponding window.
  • Page 61 4. Operation of systems and equipment Speed sensing door lock Collision unlock function WARNING If this function is activated with all doors With doors locked and the ENGINE START/ closed, the vehicle will be automatically locked STOP button set to “ON” position, when the When the child safety lock is activated, at certain vehicle speed or after certain driving system detects that the vehicle has suffered a...
  • Page 62 4. Operation of systems and equipment Intelligent active locking NOTE NOTE With the intelligent active locking function activated and the ENGINE START/STOP ● This function can be activated or ● This function can be activated or button set to “OFF” position, after all deactivated via “Settings → Body deactivated via “Settings → body Body doors are closed, if the intelligent remote Accessories → Door/window Lock →...

  • Page 63: Flush-Fit Door Handle

    4. Operation of systems and equipment 4.2.4 Flush-fit door handle The intelligent active locking function will not When using the flush-fit door handle, please work when one of the following conditions read and observe the following precautions: Electric flush-fit door handle * occurs: CAUTION The ENGINE START/STOP button is set to “ACC” or “ON” position. Stow the flush-fit door handle before The intelligent remote control key is in the washing the vehicle, so as to avoid water...
  • Page 64 4. Operation of systems and equipment Ice-breaking operation guide on flush-fit After the door handle can be moved, door handle at low temperature unfold and fold the door handle several times to remove the residual ice and When the key is close to the vehicle, the ensure that the door handle can be fully vehicle will automatically detect the remote retracted in place.

  • Page 65: Door

    4. Operation of systems and equipment 4.2.5 Door 4.2.6 Liftgate WARNING Unlocking liftgate with remote control key ● Make sure all doors are closed before If the vehicle has the PLG function, two driving, otherwise unclosed doors presses on the button of the remote will open and cause accidents or control key within the effective range will injuries.
  • Page 66 4. Operation of systems and equipment Operation of outside button of liftgate * If the vehicle has the PLG function, the NOTE liftgate will automatically open to the set position. During opening, if you press this W h e n t h e v e h i c l e i s u n l o c k e d a n d button, the liftgate will stop opening.
  • Page 67 4. Operation of systems and equipment Setting of second height of liftgate: Easy open of PLG * NOTE When the height of opening of liftgate is 55%~98%, press and hold the inside switch of ● When the liftgate is automatically liftgate for about 2 s to set the second height of opened, the horn will sound once, the liftgate successfully, which will be indicated by high-mounted stop lamp will flash 4...
  • Page 68 4. Operation of systems and equipment Emergency opening of liftgate Closing of liftgate CAUTION ● When washing the vehicle, make sure that the intelligent remote control key is outside the liftgate induction area; otherwise the liftgate will be opened. T h e r e f o r e , i t i s r e c o m m e n d e d t o deactivate this function in this case.
  • Page 69 4. Operation of systems and equipment NOTE CAUTION ● When the PLG is electrically closed from ● The PLG must always be closed fully, standstill, the turn signal lamp flashes otherwise accidents may easily occur. twice and the buzzer sounds. ● Be careful when closing the liftgate ● When the PLG is closed, the buzzer will to ensure that no person or obstacle sound intermittently.

  • Page 70: Engine Hood

    4. Operation of systems and equipment 4.2.7 Engine hood Opening of engine hood If the locking mechanism ② is pushed Lift the engine hood to the limit position, as arrowed, the engine hood will be fully take out the stay bar from the stay bar bracket ①...

  • Page 71: Power Windows

    4. Operation of systems and equipment 4.2.8 Power windows Closing of engine hood Driver’s power window control button Take out the stay bar from the fixing hole The power window can be operated when the ② and place it on the stay bar bracket ① ; ENGINE START/STOP button is in the “ON” Lower the hood to a height of about 30 position.
  • Page 72 4. Operation of systems and equipment If the button ① is pulled up to the first If you press the passenger’s window Passenger’s power window control button lock button ⑤ *, the button indicator stop position, the power window will be lifted for closing until the button is lamp will come on, and the front and released or the window reaches the...
  • Page 73 4. Operation of systems and equipment L o c k i n g - s e n s i t i v e w i n d o w c l o s i n g Automatic window calibration * Initialization of anti-pinch function * function * If the window cannot be automatically raised...

  • Page 74: Electric Sunshade

    ● I f t h e p o w e r w i n d o w s y s t e m NOTE fails, please go to the GAC Motor authorized shop for inspection and I f t h e s w i t c h i s p r e s s e d d u r i n g t h e repair in time.
  • Page 75 4. Operation of systems and equipment Remote control Electric sunshade anti-pinch function WARNING When you press and hold the button The electric sunshade has anti-pinch function when sliding closed to prevent the sunshade on the remote control key with the ● T h e a n t i - p i n c h f u n c t i o n o f t h e from catching large items when closed.

  • Page 76: Basic Operation Of Body Anti-Theft System

    4. Operation of systems and equipment 4.2.10 Basic operation of body Electric sunshade initialization Activation of body anti-theft function anti-theft system When the ENGINE START/STOP button is in “OFF” position and the vehicle is armed, Body anti-theft function - remote unlocking if the door is unlocked by an illegal key or is forcibly unlocked, the anti-theft system will be When the ENGINE START/STOP button is activated, the anti-theft horn will sound and the...

  • Page 77: Lamps And Vision

    If you have any doubt, please contact the GAC or driving the vehicle, but may recur. Motor authorized shop. ● If there are a lot of water drops or water ingress in the lamps, please contact the GAC Motor authorized shop for inspection. ① Lamplight switch ② Fog lamp switch NOTE...
  • Page 78 If the corresponding indicator lamp on the instrument cluster flashes faster, one of the turn signal lamps may be faulty, please go to the GAC Motor authorized shop for inspection and repair in time. When the ENGINE START/STOP button When the ENGINE START/STOP button is in the “ON” position, turn the lamplight switch...
  • Page 79 At this time, you lamp is automatically turned off. should manually control the light and go If the automatic headlamp on/off function to the GAC Motor authorized shop for Position lamp is activated, the vehicle will automatically inspection and repair in time.
  • Page 80 4. Operation of systems and equipment Low beam NOTE NOTE Rotate the lamplight switch to the position to turn on the low beam. If you forget to turn off the position lamps ● The high beam may cause dazzling to when the ENGINE START/STOP button is drivers of oncoming vehicles at close High beam set to the “OFF”...
  • Page 81 4. Operation of systems and equipment Manual headlamp leveling Follow Me Home Fog lamp switch Within 10 minutes after switching the power supply switch to the “OFF” position, if you turn the lamp switch from the “OFF” position to other positions and then back to the “OFF”...
  • Page 82 4. Operation of systems and equipment Hazard warning lamp The hazard warning lamp shall be turned Vehicle assisted lighting on in the following cases so as to attract the If you press the unlocking button attention of persons on the road and reduce the remote control key within the effective the risk of traffic accidents: range, the position lamps will stay on for...

  • Page 83: Interior Lamps

    4. Operation of systems and equipment 4.3.2 Interior lamps Interior light delay off Dome lamp W h e n t h e d o m e l a m p s a r e o ff a n d t h e Automatic light-on function of dome lamps automatic light-on function of dome lamps is activated: If the ENGINE START/STOP button is in...
  • Page 84 4. Operation of systems and equipment Rear dome lamp Type II Type I When the front dome lamps are off, touch the front dome lamp switch ③ on the When the rear dome lamps are off, press corresponding side to turn the front dome ① to turn on the rear dome lamps; press When the rear dome lamps are off, press lamp on; touch it again to turn it off.

  • Page 85: Wiper Combination Switch

    4. Operation of systems and equipment 4.3.3 Wiper combination switch Smart ambient light* Other parameters cannot be adjusted when the ambient light function is turned Click on the vehicle model in the main interface off; when the ambient light function is of AV system or “My Car”...
  • Page 86 AUTO: automatic wiping * ③ AUTO: automatic wiping * manually control the wiper and go to If the wiper combination switch is turned the GAC Motor authorized shop for INT: intermittent wiping* to the ③ AUTO position, the automatic inspection and repair in time.

  • Page 87: Windshield

    4. Operation of systems and equipment 4.3.4 Windshield INT: intermittent wiping* Front windshield washer system on If the wiper combination switch is turned If the wiper combination switch is turned Windshield to the ③ INT position, the front wiper will toward the rear of the vehicle to the start wiping intermittently.

  • Page 88: Rearview Mirror

    4. Operation of systems and equipment 4.3.5 Rearview mirror WARNING WARNING Interior rearview mirror ● Always keep the glass surface clean. Do not adjust the interior rearview mirror during driving, as you will be distracted ● P l e a s e a f f i x t h e n e c e s s a r y from driving, causing loss of control identifications according to local to vehicle and dangerous accident...
  • Page 89 NOTE Electric adjustment If the exterior rearview mirror function fails, please go to the GAC Motor authorized shop for inspection and repair in time. WARNING A l t h o u g h t h e c u r v e d ( c o n v e x a n d...
  • Page 90 4. Operation of systems and equipment Electric folding * Defrosting and defogging function * NOTE This function can be activated or deactivated via “Settings → body accessories → exterior rearview mirror → automatic folding of exterior rearview mirror” in the AV system. CAUTION ● If the electric folding function fails or the vehicle does not have the electric folding function, the mirror can be folded manually.

  • Page 91: Sun Visor

    4. Operation of systems and equipment 4.3.6 Sun visor CAUTION ● After defrosting and defogging function is automatically turned off, if the defog or frost still needs to be removed, press the button again. ● Do not continuously use the defrosting and defogging function for a long time, otherwise the heater may be overheated and damaged.

  • Page 92: Seats And Storage Facilities

    4. Operation of systems and equipment 4.4 Seats and storage facilities Height adjustment of front seat headrests WARNING 4.4.1 Headrest In order to reduce the risk of accidental casualties, please strictly observe the followings: ● Do not adjust the headrest while driving.

  • Page 93: Front Seat

    4. Operation of systems and equipment 4.4.2 Front seat Power seat* Manual seat * NOTE When measuring the depth of the seat cushion, be sure to adjust the longitudinal position of the seat to the middle of the slider rail and the seat back to the normal operating state (25°).

  • Page 94: Rear Seat

    4. Operation of systems and equipment 4.4.3 Rear seat Seat ventilation* ② Intelligence C l i c k “ I n t e l l i g e n c e ” t o t u r n o n t h e Rear seat back folding down / reset intelligence mode of seat ventilation.

  • Page 95: Storage Facilities

    4. Operation of systems and equipment 4.4.4 Storage facilities Instrument panel storage compartment NOTE Storage compartment on door interior trim Pull the seat back switch ① towards the panel front of the vehicle and push the seat back backward at the same time until the seat back is locked, and the rear seat back can be adjusted to a certain angle.
  • Page 96 4. Operation of systems and equipment Cup holder Instrument panel lower storage compartment Front central armrest box Front cup holder: beverage bottles can be Place books, ipad, etc. here. Open the front seat central armrest box placed. cover upward to place items such as wallets.
  • Page 97 4. Operation of systems and equipment Storage bag on the back of front seat Front passenger’s glove box WARNING The glove box must be closed when the vehicle is traveling, otherwise the articles in the glove box may fly out and cause personal injury to the occupants in case of an emergency braking or an accident.

  • Page 98: Low Battery Reminder

    4. Operation of systems and equipment 4.4.5 Low battery reminder 4.4.6 Quiescent current Information to be know: management function When the engine is not started, because the Function description: battery cannot be charged, the use of vehicle Function description: electrical equipment (such as radio, lights, etc.) The vehicle continuously monitors the battery will directly consume battery power, and the status.

  • Page 99: Power Outlet / Usb Interface

    4. Operation of systems and equipment 4.4.7 Power outlet / USB interface Front USB interface Front TYPE-C interface Central armrest box rear USB interface With the ENGINE START/STOP button With the ENGINE START/STOP button in the “ACC” or “ON” position, a mobile in the “ACC” or “ON” position, a mobile device can be connected directly for use.

  • Page 100: Trunk

    4. Operation of systems and equipment 4.4.8 Trunk Front 12 V power outlet socket Trunk volume Fold down the rear seat back to increase In order to ensure the maneuvering stability of the trunk capacity. => See page 88 the whole vehicle, the luggage shall be placed as evenly as possible, and the heavy objects CAUTION shall be placed at the front of the trunk.
  • Page 101 4. Operation of systems and equipment Objects in trunk Warning triangle Driver’s tools/spare tire Trunk carpet Pull up the drawstring and open the trunk Pull up the drawstring and open the trunk carpet. carpet. Pull up the drawstring and open the trunk There is a warning triangle ①...

  • Page 102: Luggage Rack

    (ABS) on the vehicle. vehicle, please make sure you consult the GAC Motor authorized shop before installing The luggage rack of this vehicle is a decorative accessories or replacing parts. part and cannot directly carry articles.
  • Page 103 GAC Motor parts will seriously damage the o f t h e v e h i c l e m a y w e a k e n t h e performance of the vehicle.

  • Page 104: Hvac System

    C and ensure normal air intake of the cooling, peculiar smell of air, etc.), please possible. HVAC system. go to the GAC Motor authorized shop for inspection and repair. ● The HVAC system can only play its best role after the windows are closed.

  • Page 105: A/C System

    4. Operation of systems and equipment 4.5.2 A/C system A/C control interface description ① Seat ventilation soft key * ② A/C cooling button ③ AUTO mode soft key * ④ Recirculation/fresh air mode soft key * Recirculation mode soft key Fresh air mode soft key ⑤...
  • Page 106 4. Operation of systems and equipment A/C control interface description (continued) ⑫ Air volume level display Display the air volume (7 levels), swipe the button left and right to adjust the air volume. ⑬ Air supply mode soft key ⑭ Plasma purification function soft key * ⑮...
  • Page 107 4. Operation of systems and equipment A/C control buttons Temperature control button CAUTION Set the interior temperature by clicking the AV system soft key soft key. The temperature value displayed on the AV system display is the target value Press and hold the soft key of temperature setting, not the actual soft key (for more than 0.5 s), so that the measured value of the indoor temperature.
  • Page 108 4. Operation of systems and equipment Air volume setting Air circulation CAUTION Click soft key to increase/ Repeatedly click the AV system *soft key to switch the air circulation decrease the air volume by one level. The ● Long-term recirculation mode will cause between recirculation mode, fresh air mode AV system will display the corresponding accumulation of carbon dioxide in air volume level.
  • Page 109 4. Operation of systems and equipment Automatic mode * defogging function. Rear windshield defrost/defog function The button indicator lamp will come on and the Click the AV system * button to CAUTION A/C system will enter the auto running mode if activate the rear windshield defrosting, the “AUTO”...
  • Page 110 4. Operation of systems and equipment Air supply mode Negative ion air purifier* Floor/defrost mode: Air flows out from the front windshield defrost outlets and Click the air supply mode button on the A/ floor outlets. C control interface of the AV system or in the Defrost mode: Air flows out from the resident toolbar at the bottom of the AV display front windshield defrost outlets.

  • Page 111: A/C Air Outlet

    4. Operation of systems and equipment 4.5.3 A/C air outlet Instrument panel central air outlet Rear air outlet* Instrument panel side air outlet Toggle the paddle ① to adjust the wind Toggle the paddle ① to adjust the air direction or close the air outlet. direction.

  • Page 112: Av System

    4. Operation of systems and equipment 4.6 AV system Bluetooth setting interface. ④ Voice button ② W i t h t h e m o b i l e p h o n e c o n n e c t e d Next song/channel button 4.6.1 Buttons on the right of the...

  • Page 113: Basic Operations

    4. Operation of systems and equipment 4.6.2 Basic operations ① Smart card area Click the cards to quickly enter the corresponding function interfaces. ② Drop-down menu bar Pull down to enter the drop-down menu bar control interface. ③ Smart scene area The smart scene area includes car model, A/C scene (rapid cooling, rapid heating) and driving mode switching, Wallpaper switching.
  • Page 114 4. Operation of systems and equipment Driving control panel button : Click to Drop-down menu bar My car enter the driving control panel. A/C information display/control bar area: display the current A/C information, click the A/C area to enter the A/C setting interface.
  • Page 115 4. Operation of systems and equipment CarPlay Method 2: NOTE Turn on the Bluetooth of the mobile phone and search the mobile phone in ● For the functions and applications the Bluetooth connection interface of the supported by CarPlay, refer to the IHU.
  • Page 116 4. Operation of systems and equipment EasyConnection Method 1: Android mobile phones that support EasyConnection can be connected to the USB interface of the host. Click the EasyConnection icon on the IHU to enter the function and connect the mobile phone automatically.

  • Page 117: Radio

    4. Operation of systems and equipment 4.6.3 Radio Enter the radio interface in the following ways: Enter the radio interface by clicking on the “Radio” card in the main interface. Frequency of current radio station P r e s s t h e s o u n d s o u r c e s w i t c h i n g button on the right side of the steering Channel decrease Channel increase...

  • Page 118: Local Music

    4. Operation of systems and equipment 4.6.4 Local music Enter the local music playback interface in the following ways: Enter the local music interface by clicking Sound source selection Sound effect setting on the “Meida” card in the main interface. Press the sound source switching button on the right side of the steering wheel repeatedly to switch to the local music interface.

  • Page 119: Bluetooth Function

    4. Operation of systems and equipment 4.6.5 Bluetooth function If there is no Bluetooth device connected, enter the Bluetooth connection interface Enter the Bluetooth mode in the following in the above way. ways: Click the “Bluetooth switch” soft key C l i c k t h e “ P h o n e ” s o f t k e y i n t h e to turn on the Bluetooth function, and application menu interface to enter the the IHU will automatically search for...

  • Page 120: Child Seat With Smart Bluetooth

    4. Operation of systems and equipment 4.6.6 C h i l d s e a t w i t h s m a r t When the child leaves the seat for a period Bluetooth seat alarm of time, Bluetooth will go to sleep. Wake up Bluetooth* Bluetooth again as follows: Trigger the seat cushion switch manually.

  • Page 121: Settings

    4. Operation of systems and equipment 4.6.7 Settings Enter the system settings interface by pressing the soft key “Settings” in the application menu. Click on an option to select it, click on the slider enable/disable the function, and drag the progress bar for adjustment. Settings group Function Function...
  • Page 122 4. Operation of systems and equipment Settings group Function Function Options Intelligent high beam* On/Off Exterior light Follow Me Home On/Off Remote unlocking All doors/driver's door only Auto unlock when the engine is shut On/Off down Intelligent active locking On/Off Intelligent active unlocking On/Off Door/window lock...
  • Page 123 4. Operation of systems and equipment Settings group Function Function Options Media volume Call volume DTS sound effect* On/Off Natural soundtrack/clear voice/subbass/leisure DTS sound effect mode* mode Best listening position* Driver/All occupants mode Equalizer mode Classic/Pop/Jazz/Rock/Custom Treble * –10~10 System sound effect Sound effect Alto* –10~10 settings Bass * –10~10 Sound field * Reset Speed-sensitive volume control...
  • Page 124 4. Operation of systems and equipment Settings group Function Function Options Time and date Setting 24-hour system On/Off Basis Settings Language setting Chinese/English/Arabic/Indonesian/Spanish System settings System version System Information Memory size Factory reset Reset Note: 1) It can be selected when “Off” is selected for DTS sound effect setting. 2) It can be selected when “ON” is selected for DTS sound effect setting.

  • Page 125: Emergency Rescue

    SOS button ① : press and hold (3s) this the emergency contact. button to make the GAC Motor T-BOX to M a n u a l e m e r g e n c y c a l l : w h e n t h e...

  • Page 126: Driving Guide

    5. Driving guide 5. Driving guide 5.1 Starting and driving 5.1.1 Engine start/stop button When the transmission gearshift lever is in P switch it to “ACC” or “ON” position or depress gear and the brake pedal is depressed, press the brake pedal, and press the ENGINE the ENGINE START/STOP button to start the START/STOP button to start the engine. engine.

  • Page 127: Engine Start

    5. Driving guide 5.1.2 Engine start CAUTION WARNING Enter the vehicle with the intelligent remote control key. ● The engine start time shall not exceed ● Do not keep starting the engine for a 1 5 s . I f t h e e n g i n e i s n o t s t a r t e d long time in a poorly ventilated place Make sure the gearshift lever is in “P”...

  • Page 128: Engine Shutdown

    5. Driving guide 5.1.3 Engine shutdown WARNING WARNING Park the vehicle steadily and apply the parking brake. Emergency shutdown is forbidden ● When leaving the vehicle, you must during normal driving, as it is likely turn off the engine, apply the parking Set the gearshift lever to the “P” gear. to lead to vehicle damage, safety and brake, and carry the vehicle key with Release the brake pedal and press the...

  • Page 129: Gear Description

    5. Driving guide 5.1.4 Gear description Push the gearshift lever backward to shift P: Parking from “R” to “D”. In this process, there are two resistance points. The first resistance point indicates “N” position, and the second resistance point indicates “D” position. WARNING The “R” or “P” position can be engaged only when the vehicle is completely stationary, otherwise the transmission will be damaged.
  • Page 130 Driving mode can be switched via AV system: position can not be disengaged, please lever forward to the first resistance point ECO: In this mode, the slight power contact the GAC Motor authorized shop position to shift to “N” position. hysteresis occurs and fuel consumption is for inspection and repair.
  • Page 131 5. Driving guide Driving mode selection Driving mode Current mode settings Comfort Rapid Rapid Driving mode cooling warming Suitable for driving on congested roads Steering force: comfort Comfort AVDC: steady Movement Comfort Movement 2. Set the ENGINE START/STOP button to 3. Set the ENGINE START/STOP button to the “ON” position, and switch the driving the “ON” position, and switch the driving...

  • Page 132: Brake System

    ● If there is metal-metal friction rasp, the brake lining may be worn to the limit. Please go to the GAC Motor authorized shop for inspection and repair as soon as possible. ● I f t h e s t e e r i n g w h e e l v i b r a t e s o r...
  • Page 133 5. Driving guide Brake booster Braking effect and braking distance NOTE The brake booster is used to increase the The braking effect and braking distance mainly pressure applied by the driver on the brake depend on the driving environment, road ● Do not rest your foot on the brake pedal, and it only works when the engine is conditions and driving style, pedal during driving, otherwise the running.
  • Page 134 5. Driving guide WARNING WARNING WARNING A new tire and brake lining having When the brake is wet or icy or when Overheating of the brake will reduce the n o t u n d e r g o n e r u n n i n g - i n d o n o t the vehicle is running on a salted road, braking effect and lengthen the braking have the best adhesion and friction...

  • Page 135: Epb

    When the gearshift lever is moved to the applied again against slipping of the “P” position from other positions, the EPB vehicle, please depress the brake pedal will be applied automatically. and drive the vehicle to a flat road. It is recommended to go to the GAC Motor authorized shop for inspection and repair in time.
  • Page 136 5. Driving guide When the ENGINE START/STOP button NOTE WARNING is in the “ON” position and the gearshift lever is not in the D or R, close the ● The EPB can also be applied when the When the vehicle is running, do not door, fasten the seat belt, and depress ENGINE START/STOP button is in the apply the EPB for speed reduction the accelerator pedal to release EPB...
  • Page 137 EPB. Contact the GAC Motor authorized shop for inspection and If the service brake fails during vehicle repair. driving, try to continuously pull up the EPB...
  • Page 138 EPB again. If the fault Excellent 32 the vehicle, the vehicle will be automatically still remains, please go to the GAC Motor parked to avoid slide at startup. authorized shop for inspection and repair. ● If the indicator lamp...

  • Page 139: Electronic Service Brake System

    5. Driving guide 5.3 Electronic service brake For the sake of safety, the AUTO HOLD will be Oversteer disabled and the parking brake will be locked system under one or more of the following conditions: 1. The ENGINE START/STOP button is set 5.3.1 Electronic stability program to “OFF”...
  • Page 140 5. Driving guide On and Off Since the ESP works only when the vehicle Understeer is running, the ESP shall be activated for driving safety. The ESP can be disabled in the following special cases: Driving assistance when the vehicle runs with tire chains. when the vehicle travels on roads covered ESP off with deep snow or on soft grounds.

  • Page 141: Anti-Lock Brake System (Abs)

    5. Driving guide 5.3.2 Anti-lock brake system Traction Control System (TCS) WARNING (ABS) ESP cannot reduce the risk of accidents caused by improperly driving such as driving ● Be sure to adjust the vehicle speed Anti-lock brake system (ABS) is an active at a high speed or driving too close to the according to weather, road and safety device.
  • Page 142 ABS, restore normal braking, and go subject to the limitation of the laws of to the GAC Motor authorized shop for kinematics. Therefore, please adjust inspection and repair as soon as possible.

  • Page 143: Hhc

    5. Driving guide 5.3.3 5.3.4 HDC* Working conditions The gearshift lever is in a position other The hill-start hold control (HHC) is an active The Hill Descent Control (HDC) is a subsystem than “P”. safety system from software function extension of ESP.

  • Page 144: Hbc

    8 km/h while going downhill. go down a steep slope. In addition, the driver should go to the GAC Motor In addition, the driver can adjust the vehicle authorized shop for inspection and speed by depressing the accelerator pedal or repair as soon as possible.

  • Page 145: Driving Assistance System

    5. Driving guide 5.4 Driving assistance system Button operations NOTE 5.4.1 ACC* Precautions for use of radar and IFC The adaptive cruise control, abbreviated to sensors. => See page 171 ACC, can automatically adjust the distance from the vehicle ahead in the cruise control WARNING mode, ACC detects the relative distance and speed...
  • Page 146 The yellow ACC indicator lamp lights up to indicate that there is a fault, After the ENGINE START/STOP button and you should go to the GAC Motor is set from the “OFF” position to the “ON” authorized shop for inspection and repair position each time, ACC will automatically in time.
  • Page 147 5. Driving guide Deactivating ACC If deactivated by the following ways, ACC may WARNING be resumed through the button: ACC can be deactivated by: depressing the brake pedal. Open the driver’s door. ● When the vehicle is in the “engine running”...
  • Page 148 5. Driving guide Resuming ACC Increasing cruising speed NOTE When the corresponding gray indicator lamp To increase the vehicle speed, please perform on the instrument cluster comes on, ACC can the following operations: ● The settable maximum cruising speed is be reset by the following ways: Depress the accelerator pedal to increase 130 km/h.
  • Page 149 5. Driving guide Decreasing cruise speed Controlling ACC distance Activating ACC after following stop To reduce the vehicle speed, please perform After the ENGINE START/STOP button is set In the process of following a vehicle in front, the following operations: to “ON” position, when ACC is activated, the your vehicle will also be stopped if the vehicle default time interval setting is in the fourth in front is stopped.
  • Page 150 5. Driving guide System limitations As limited by physical laws, ACC has a certain system limitation. In some driving environments, the driver may feel a response lag of ACC or the failure of ACC to control the vehicle as expected, so he or she must always be ready to control the vehicle.
  • Page 151 5. Driving guide 4. Narrow vehicles and Z-shaped traffic in When another vehicle changes the lane. If the target vehicle in front is driven out front. The narrow vehicles and Z-shaped When a vehicle in the adjacent lane goes suddenly and a stationary vehicle appears traffic in front can be detected by the radar into the ego lane, if it does not enter the at close range, the radar sensor and...
  • Page 152 5. Driving guide Frosting or fogging of front windshield WARNING due to temperature difference or frost in low-temperature and alpine areas, ● The ACC cannot address all driving which will obstruct the IFC sensor, and scenarios and traffic, weather and cause display of following telltales on road conditions.
  • Page 153 5. Driving guide WARNING WARNING NOTE ● For the sake of safety, it is not ACC does not respond or responds only ● Do not bump the radar sensor. If the allowed to use ACC under conditions to a limited extent to the followings: sensor is misaligned due to bumping, such as urban driving, traffic jams, t h e s y s t e m p e r f o r m a n c e w i l l s t i l l...
  • Page 154 It is recommended to unable to identify the vehicle ahead, increase the speed at any time. After go to the GAC Motor authorized shop ACC shall be deactivated. releasing the accelerator pedal, the for inspection and repair in time.

  • Page 155: Integrated Cruise Assist (Ica)

    5. Driving guide 5.4.2 Integrated cruise assist Display of longitudinal distance from NOTE vehicle ahead (ICA)* ACC detects the relative distance between The radar sensor and IFC are limited in The integrated cruise assist system is the lead vehicle and the ego vehicle on the detection and cannot recognize vehicles abbreviated as ICA.
  • Page 156 5. Driving guide Operation instruction Interface description actual situation of the driver holding the steering wheel. Press the button on the left side of the ② ACC indicator lamp steering wheel to turn on ICA. ③ Cruising speed set previously After turning on ICA, press the operation mode of ACC to turn on or activate ICA.
  • Page 157 5. Driving guide Lateral control When the ICA system intervenes in the the hand torque applied to the steering wheel, steering wheel for lateral assist control, the the driver’s hands on the steering wheel can When the function of ICA is activated, the driver can still turn the steering wheel to control be recognized and the hands-on reminder will lateral control will be automatically activated...
  • Page 158 5. Driving guide Intelligent avoidance Limitations When the ICA is activated, the intelligent The ICA system is limited in the functions of avoidance system will automatically control both steering and brake systems, so it is not the vehicle to avoid when it recognizes a able to maintain proper stop distances in all specific side risk (such as a large vehicle in road conditions or keep the vehicle in its lanes...
  • Page 159 5. Driving guide Failure to turn on headlamps at night or in The longitudinal control of the ICA system NOTE the dark tunnel. is based on ACC. See the relevant chapter of ACC for more limitations => N o l a n e m a r k i n g , o r d i f f i c u l t y i n When the ICA system is assisting in the See page 144.
  • Page 160 5. Driving guide CAUTION WARNING WARNING ● I f t h e I C A i s d e a c t i v a t e d f o r a n y ● The ICA is only a driving assistance ● Improper use or negligence of the reason, such as a brief exit due to function and cannot cope with all...

  • Page 161: Forward Collision Mitigation (Fcm)

    5. Driving guide 5.4.3 Forward collision mitigation WARNING WARNING (FCM)* ● The ICA system doesn’t always ● The ICA system cannot apply brakes The FCM detects the relative distance and identify lane markings. The lane for pedestrians, animals, foreign speed between the object on the front path m a r k i n g s m a y b e m i s s e d o r objects, low platform trailers or and the vehicle according to the MMW radar...
  • Page 162 5. Driving guide Detectable objects: It detects the objects ahead through the MMW It detects the objects ahead according to the radar installed on the front bumper and the IFC MMW radar installed on the front bumper on the front windshield, and alerts the driver of and the IFC on the front windshield, enters the impending collision.
  • Page 163 5. Driving guide On and off When the vehicle is running, if a collision risk is detected, an early warning will be given Medium Near When the vehicle is running, if a collision risk is detected, the vehicle will be controlled to slow down L e v e l 2 b r a k i n g : S l i g h t a u t o m a t i c Level 3 braking: Full braking is applied emergency braking is applied in the case...
  • Page 164 5. Driving guide System limitations A detectable object ahead suddenly NOTE comes in front of the vehicle. FCM have physical and system limitations; The vehicle ahead is a bicycle with a for example, FCW and AEB functions may be ● The warning distance “far, medium special shape, such as a multi-person inadvertently triggered or delayed by driver and near”...
  • Page 165 5. Driving guide Pedestrians wearing fancy clothes or The vehicle approaches a roadside WARNING masks, for example, carnival costumes telegraph pole, railing, tree, etc. Poor visibility, such as sunset, night, When driving through grass, branches, ● The FCM can improve your driving snow, heavy rain, fog, backlight, etc.

  • Page 166: Traffic Sign Recognition (Tsr)

    5. Driving guide 5.4.4 Traffic sign recognition WARNING NOTE (TSR)* ● When the FCM is turned on, the ● Depressing the accelerator pedal or The traffic sign recognition is abbreviated as driver must maintain control of the turning the steering wheel will terminate TSR.
  • Page 167 5. Driving guide When this function is turned on, if the Display interface description Activating/deactivating speed alarm sound navigation or IFC recognizes the speed limit The electronic eye speed audible alarm sign on the road ahead, the speed limit sign function can be turned on or off in the will be displayed on the instrument cluster;...

  • Page 168: Intelligent Speed Limiter Adaptive Cruise Control (Isl-Acc)

    5. Driving guide 5.4.5 Intelligent speed limiter Function limitations Inaccurate navigation and positioning results in the output of non-local road adaptive cruise control Even if the TSR is turned on and working, it speed limit information. may incorrectly or fail to detect the speed limit (ISL-ACC)* sign due to unavoidable environmental factors WARNING...

  • Page 169: Lane Departure Warning (Ldw)

    5. Driving guide 5.4.6 Lane departure warning ISL-ACC synchronized target cruising NOTE speed (LDW)* The system has on/off status memory LDW is designed to reduce the accidents function. After the vehicle is started, the caused by unintentional lane departure. on/off state will be the same as it was set The LDW detects the lane marking on the when the vehicle was shut down last time.
  • Page 170 5. Driving guide On and off Steering Warning prompt When “Steering” is selected, the system In the AV system “Settings → ADiGO intelligent The LDW warning prompt is only triggered in only intervenes in the steering wheel for driving → ADiGO active safety assistance → the “Warning” or “Steering and warning” mode. lane keeping assist.
  • Page 171 5. Driving guide Turn on the hazard warning lamp. Hands-on reminder When the indicator lamp is blue, if there Turn the steering wheel quickly. is no action mentioned above and the vehicle deviates from the lane (for example, the driver The time from the last alarm is short. accidentally deviates from the lane due to Continuously cross the lane markings.
  • Page 172 5. Driving guide Function limitations Unobvious, too thin, worn, blurred or dirt/ NOTE snow-covered lane markings. Even if the LDW is turned on and working, Too wide or narrow lanes. it may incorrectly or fail to detect the lane The system may misjudge the driver’s markings due to unavoidable environmental Increased or decreased number of lanes, hands off the steering wheel when the...
  • Page 173 5. Driving guide The performance of the system intervening in CAUTION WARNING the steering wheel for the corrective assistance may be affected in the following situations: ● When the LDW detects an unintentional ● T h e L D W i s o n l y a n a u x i l i a r y The vehicle is overloaded.
  • Page 174 5. Driving guide WARNING WARNING WARNING ● The LDW does not always recognize ● Av o i d s t r o n g i m p a c t , m o i s t u r e ● When the system cannot detect the lane markings or lane edges.

  • Page 175: Intelligent Headlamp Control (Ihc)

    5. Driving guide 5.4.7 Intelligent headlamp control Activating IHC Turn on the IHC by setting the lamplight switch to the AUTO position. (IHC)* After the IHC function is turned on, it is T h e I H C s y s t e m d e t e c t s t r a f f i c a n d in the standby state.
  • Page 176 5. Driving guide The turn signal lamp is turned on. The IFC is damaged or the power supply NOTE is interrupted. Function limitations The high beam and high beam flash WARNING The IHC function may not function in time functions can be manually turned on/off at or even be inoperative due to the following any time.

  • Page 177: Radar And

    MMW radar sensor, please be sure to go to the GAC Motor authorized shop The radar sensor must be adjusted and ● In the case of oncoming non-motor calibrated under the following conditions: for related work.
  • Page 178 The front windshield or camera bracket is MMW radar related functions (ACC/ICA/ matters. removed and replaced. FCM, etc.) and go to the GAC Motor ● When there is a strong reflection on the authorized shop in time to recalibrate The IFC sensor is removed and replaced. MMW radar ultrasonic wave (e. g. in the MMW radar sensor.
  • Page 179 IFC sensor, it is recommended to go in interruption or performance degradation windshield. In these cases, the functions to the GAC Motor authorized shop for of the FCM, ACC, ICA, AEB, LDW and IHC, of the LDW, FCM, ACC, ICA and IHC will related work.

  • Page 180: Tire Pressure Monitoring System (Tpms)

    5. Driving guide 5.4.9 Tire pressure monitoring Alarm description CAUTION system (TPMS) If the tire pressure value is higher than 330 kPa, the TPMS indicator lamp lights ● If the IFC interference factor disappears, The system monitors the pressure and up, and a warning message on the the PDS function will work normally temperature information of the tire via the tire instrument cluster display shows that...
  • Page 181 CAUTION After the tire pressure sensor is replaced or the tires are rotated, there is no need to go to the Gac Trumpchi Special Shop for calibration learning again if a tire pressure sensor suitable for the vehicle model has been properly installed.

  • Page 182: Parking Assist Systems

    5. Driving guide 5.5 Parking assist systems 5.5.1 Rear parking assist (RPA) The RPA uses the radar sensor to send and Dynamic view * receive the ultrasonic waves reflected from the obstacle so as to measure the distance between the vehicle and the obstacle. On and off Release the EPB of the vehicle, and set the gearshift lever to “R”...
  • Page 183 5. Driving guide Audible alarm with reference to distance Obstacle detection distance The audible alarm changes with the distance Audible alarm between the obstacle and the rear bumper, Rear left sensor Rear right sensor Rear middle sensor and the color on the AV system display also changes accordingly.
  • Page 184 5. Driving guide Distribution of RPA sensors CAUTION WARNING ● Always keep the surface of radar sensor ● The RPA cannot replace the driver’s clean and do not cover the radar sensor. observation of the surrounding environment. The driver should ● To ensure the function of the radar concentrate and reverse the vehicle sensor, it should be kept clean and free s a f e l y a c c o r d i n g t o t h e a c t u a l...

  • Page 185: Reverse Image System

    5. Driving guide 5.5.2 Reverse image system* Dynamic trajectory WARNING The reverse image system can provide 130° wide-angle video, and can display a wide ● When cleaning the radar sensor with range of rear video images on the AV system the high-pressure cleaner, it shall display, allowing the driver to master various be short-time and gentle, and the complex road conditions behind the vehicle...
  • Page 186 5. Driving guide CAUTION CAUTION The above trajectory is the reference ● Always keep the CCD surface clean. distance obtained by testing on flat ground When cleaning the CCD, always use and is only used as a reference for judging a piece of soft damp cloth to avoid visual distance.

  • Page 187: Around View Monitor (Avm)

    5. Driving guide 5.5.3 Around view monitor On and off This function can be set “On” or “Off” in the “Settings” item of the panoramic view “. (AVM)* 1. The AVM can be turned on and off by the gearshift lever. When the vehicle power The AVM can provide the driver with vehicle switch is in “ON” position: surrounding environment information through When the gear is shifted to “R”...
  • Page 188 5. Driving guide Interface description ① Exit soft key ② Current view direction ③ 2D/3D/wide angle view switching sofy key ④ Message pop-up window ⑤ Setting ⑥ Trajectory ⑦ Radar distance display ⑧ Radar detection area ⑨ Soft key for view direction switch NOTE The interface and function buttons of the AVM display differs depending on the...
  • Page 189 5. Driving guide Settings of AVM Panoramic view activation via turn signal NOTE lamp Trajectory When the turn signal lamp-panoramic ● When the AVM is turned on, the AV The trajectory is displayed in the top view view activation switch is turned on, if the system will start to display the images and 2D view after the trajectory switch vehicle speed is within 20 km/h and the...
  • Page 190 5. Driving guide Camera distribution NOTE NOTE ● When gearshift lever is in the “R” gear, ● On the wide angle interface, you can the image display defaults to single 2D view different camera views of “front rear view. wide angle”, “rear wide angle”, “front wheel” and “rear wheel”. ● When gearshift lever is in the “R” gear, the image display defaults to single 2D ● When the left turn signal lamp is turned...
  • Page 191 5. Driving guide NOTE To ensure the normal operation of the camera: ● Please keep the camera surface clean and free of ice, snow, accumulated water, dust and other foreign objects. ● When foreign matters are found on the surface of the camera, please wipe them with a soft cloth or clean with water (at low water pressure), and keep a distance of at least 30 cm from the...
  • Page 192 5. Driving guide CAUTION CAUTION WARNING Functional limitations: The following conditions can cause the ● The camera is only for auxiliary use, camera failure to identify the target, delay and the camera cannot work normally ● When the camera fails to work normally, in identification, or incorrect identification: under all driving, traffic, weather and the function that relies on the camera to road conditions.

  • Page 193: Electric Power Steering (Eps)

    When driving, it is forbidden to set steering Please contact the GAC Motor authorized vehicle safety. mode to prevent accidents. shop for inspection and repair in time.

  • Page 194: Driving Skills

    5. Driving guide 5.7 Driving skills 5.7.2 Driving during running-in After start/during driving period Check whether the instrument cluster 5.7.1 Pre-driving safety works properly; Check whether there is In order to ensure the service life of the inspection indicator lamp, alarm message, etc. vehicle, the vehicle must be run in at the initial Check whether all the control units (such stage of use before it can be put into normal...
  • Page 195 5. Driving guide Engine running-in Running-in of tire and brake lining WARNING The mileage in the running-in period of a new Within the mileage of 500 km, the new vehicle engine shall be 1500km. Do not perform the shall be driven at a moderate speed for good ● If the brake is damp, frozen or the following operations within 1000 km of the running in of new tires.

  • Page 196: Driving Essentials

    5. Driving guide 5.7.3 Driving essentials Precautions while driving over a water- NOTE logged road section: Precautions under various road conditions: Before driving on a waterlogged road After vehicle cleaning or driving on deep section, check the depth of water, which When driving on roads with crosswinds or water road, the brake lining and brake disc shall not exceed the lower edge of the...

  • Page 197: Efficient Use Of Vehicle

    Condensed Use detergent containing antifreeze: Do not make the vehicle load overweight, water adhering to the engine oil may give Such products are available in GAC Motor but remove unnecessary items from the an illustration of water-in-oil emulsion. authorized shop.

  • Page 198: Fire Prevention

    Do not open windows when driving at high extinguished, fire may be caused. to be ignited, causing a fire. speed. It is recommended to go to the GAC Motor Do not park the vehicle in the garbage Properly use the A/C, etc. authorized shop regularly for inspection: dump and other places with serious rat...
  • Page 199 5. Driving guide Keep portable fire extinguisher on the vehicle, and master the use method: In order to ensure the safety of the vehicle, it shall be equipped with fire extinguisher, and shall be inspected and replaced regularly; At the same time, be familiar with the use of fire extinguisher, and be prepared to avoid being helpless in case of accidents.

  • Page 200: Use And Maintenance

    6. Use and maintenance 6. Use and maintenance 6.1 Maintenance instructions 6.2 Interior maintenance Potential hazards of the vehicle Carbon monoxide: carbon monoxide in Safety precautions Cleaning and maintenance of instruments the exhaust gas of the engine is toxic. Be sure to operate the engine in a well- and plastic parts To avoid potential hazards, please read this ventilated place.
  • Page 201 6. Use and maintenance Cleaning and maintenance of carpet Cleaning and maintenance of leather* Cleaning and maintenance of seat belt Vacuum the dust on the carpet frequently. Vacuum the dust. Pull out the seat belt slowly and keep it in the pulled-out state.

  • Page 202: Exterior Maintenance

    Frequent vehicle wash helps to protect the normal operation of the corresponding system. belt is damaged, go to GAC Motor appearance of the vehicle. Therefore, it is recommended to go to the GAC...
  • Page 203 ● Pay attention to personal safety when filtering state of the clean water, and the scratches. If any, drive to the GAC Motor washing the vehicle manually, and type of wax solvent that do not meet the authorized shop for touch-up.
  • Page 204 6. Use and maintenance Waxing Cleaning and maintenance of external Washing of windows and rearview mirrors plastic parts Regular waxing can protect the body paint Clean the windows and rearview mirrors with and keep the body smooth and clean. In External plastic parts are generally washed an alcohol-containing glass cleaner, and then order to effectively protect the body paint, it is...
  • Page 205 6. Use and maintenance Lift the wiper arm and carefully wipe off Maintenance of sealing strips CAUTION the dust and dirt on the wiper blade with a Frequent and proper protection of the rubber soft cloth. sealing strips of the doors, windows and other ● It is forbidden to scrape the surface After cleaning, gently lower the wiper arm parts of the vehicle is intended to maintain their...

  • Page 206: Inspecting And Adding Oils

    6. Use and maintenance 6.4 Inspecting and adding oils Add fuel CAUTION 6.4.1 Fuel ● It is prohibited to maintain the wheel As the amount of fuel decreases during vehicle surface with vehicle polish or other abrasives. running, the scale indication value on the fuel gauge will gradually decrease. =>...
  • Page 207 6. Use and maintenance NOTE This model conforms to the China VI emission standards. The China VI fuel supply system design adopts a closed oil and gas recovery system. When refueling, the refueling gun switch may be triggered and the refueling gun may jump even the refueling is not enough due to high ambient temperature or too fast refueling, which is a normal phenomenon.

  • Page 208: Engine Oil

    If oil of other grades is the regulations, do not start the Oil viscosity: used, the engine damage caused by this engine and contact the GAC Motor will not be covered under the quality ● SAE 0 W-20. authorized shop immediately for warranty.
  • Page 209 NOTE not continue to start the engine. In this case, contact the GAC Motor authorized shop timely for inspection and repair. When the oil level is checked, the engine shall be in cold state.
  • Page 210 ● If too much oil is added, do not start the engine. In this case, please contact the GAC Motor authorized shop as soon as possible. Otherwise, the three-way catalytic converter may be damaged.

  • Page 211: Coolant

    In this case, ● The front engine compartment is a NOTE contact the GAC Motor authorized shop timely high-risk area. Be sure to carefully for inspection and repair. r e a d a n d o b s e r v e t h e r e l e v a n t ● Coolant specifications: DF-6, -35 °C...
  • Page 212 6. Use and maintenance Engine coolant Intercooler coolant Add coolant Engine coolant Intercooler coolant Check whether the coolant level in the engine Check whether the coolant level in the After checking the coolant level, if it is coolant expansion tank is between the intercooler coolant expansion tank is between necessary to add coolant, please follow the maximum scale mark “MAX”...
  • Page 213 ● The coolant can only be added after go to the GAC Motor authorized shop the engine or intercooler is cooled to clean the cooling system and change with new coolant.

  • Page 214: Windshield Washer Fluid And Wiper Blade

    6. Use and maintenance 6.4.4 Windshield washer fluid CAUTION WARNING and wiper blade ● N e v e r u s e s o a p y w a t e r o r o t h e r ● Be careful when working in the Add windshield washer fluid antifreezes to replace washer fluid,...
  • Page 215 6. Use and maintenance Replace front windshield wiper blade NOTE When the wiper switch is in the “OFF” position, in the AV system “Setting → Body Accessories → Other Accessories”, click the soft key of “wiper maintenance mode”, the wiper arm will stop after half a cycle of operation;...

  • Page 216: Brake Fluid

    6. Use and maintenance 6.4.5 Brake fluid CAUTION WARNING Brake fluid function ● T h e w i p e r a r m c a n b e p u l l e d u p ● The use of waste brake fluid or Brake fluid is used to transmit power in the only after it is adjusted to the wiper...
  • Page 217 In this case, do After the engine has cooled down, check not continue driving. Please contact whether the brake fluid level is between the the GAC Motor authorized shop for maximum scale mark “MAX” and the minimum inspection and repair in time. scale mark “MIN”.

  • Page 218: Battery

    In this case, operation! please go to the GAC Motor authorized shop WARNING for inspection and repair as soon as possible. Open flames, sparks, uncovered lamps and smoking are prohibited ● Brake fluid is a poisonous substance...
  • Page 219 When leaving the vehicle, make sure that ● If you need to replace the battery, please the doors are closed and all electrical go to the GAC Motor authorized shop equipment (such as lights) are off. for replacement; If the battery of wrong model is used, the vehicle may be...

  • Page 220: A/C Filter

    In case of bulb damage or function the first 500 km cannot reach the best which causes the A/C filter to be too dirty, it is failure, please go to the GAC Motor authorized state, so drive the vehicle carefully at a recommended to replace the A/C filter earlier. shop for inspection and repair in time.
  • Page 221 6. Use and maintenance Wheel failure preventive measures WARNING WARNING The vehicle shall run slowly in the obstacle vertical direction as far as possible when If tires burst or leak when the vehicle is ● Used wheels and tires of unknown passing over curb or similar obstacle.
  • Page 222 After emergency use of the spare tire, it is Winter tire Do not replace only one tire separately, necessary to drive safely to the GAC Motor The winter tire still has good grip performance but at least replace two tires on the same authorized shop or wheel repair shop for full- when the road is covered with ice and snow.
  • Page 223 6. Use and maintenance Please note that the winter tire tread shall Check tire pressure WARNING have sufficient pattern depth (the tire tread depth shall not be less than 4 mm; ● After using the winter tire, there when it is less than 4 mm, the applicability may be reduced driving traction is limited in winter).
  • Page 224 6. Use and maintenance Balance the weight of occupants and Tire service life WARNING luggage, avoid slopes, and adjust tire pressure according to vehicle load. ● Abnormal tire pressure may lead to Check the tire pressure of spare wheel or tire burst, causing traffic accidents, emergency spare wheel at the same time.

  • Page 225: Tire Chain

    If you find any uneven and excessive emergency turning and other operations circular of the tire is worn to the pattern, the tire wear, please go to GAC Motor authorized are potentially very dangerous. tire can no longer be used safely and must be shop to check the wheel alignment in time.
  • Page 226 6. Use and maintenance NOTE CAUTION D i ff e r e n t c o u n t r i e s o r r e g i o n s h a v e ● If tire chains are installed on the tires, different regulations for tire chains, and the size and type of the tire chains shall the regulations of each country or region...

  • Page 227: Technical Data

    7. Technical data 7. Technical data 7.1 Vehicle identification number (VIN) The location of the VIN is as shown in the figure: ① VIN: engine hood ② VIN: instrument panel left side. NOTE The location indication and quantity of VIN are not complete. Please refer to the actual vehicle.
  • Page 228 VIN and vehicle status information can be read through a special NOTE diagnostic scan tool. The figure is for reference only, so please NOTE refer to the actual vehicle. If you need to purchase diagnostic scan tool, please go to the GAC Motor authorized shop for consultation and purchase.

  • Page 229: Vehicle Dimension Parameters

    7. Technical data 7.2 Vehicle dimension parameters Dimensions Parameters Item Value Unit Overall length 4680±46 Overall width 1901±19 Overall height 1670±16 Wheelbase 2750±27 Front wheel 1617±16 Wheel track Rear wheel 1610±16 Front suspension 947±9 Rear suspension 983±9 Minimum ground clearance (fully ≥160 loaded) Approach angle (fully...

  • Page 230: Vehicle Mass, Engine And Oil Parameters

    7. Technical data 7.3 Vehicle mass, engine and oil parameters Mass Kerb mass (kg) Maximum gross mass (kg) Model Maximum gross Kerb mass (kg) Front axle load Rear axle load Front axle load Rear axle load mass 1500±45 882±26 618±18 GAC7151HCW6A 1915 1007...
  • Page 231 7. Technical data Engine parameters Model 4A15J2 Layout type Transverse front Gasoline engine, spark ignition, in-line, four-cylinder, four-stroke, Type turbocharged and intercooled, GDI, DOHC, exhaust gas turbocharger Number of cylinders (pcs) Ignition order 1–3–4–2 Cylinder bore (mm) Stroke (mm) Displacement (mL) 1497 Compression ratio (11.5±0.3):1 Rated power/speed (kW/(r/min)) 130/5500...
  • Page 232 7. Technical data Oil specification and capacity Item Specification Capacity 91# and above high quality unleaded Fuel Total gasoline Engine coolant Coolant: DF-6, -35°C Total 8.2±0.1L Total 4.5L Oil grade: API SN/ILSAC GF-5 Engine oil Oil viscosity: SAE 0W-20 Replacement 4.2L Total 6.9L WDCT lubricating oil Shell Spirax S5 DCT 12 Plus Replacement 5±0.2L Intercooler coolant...

  • Page 233: Transmission, Chassis And Lamp Specifications

    7. Technical data 7.4 Transmission, chassis and lamp Wheel specifications Specifications of rim 7J × 18 *, 7.5J × 19 * Tire specifications 235/60R18*, 235/55R19* Transmission parameters No load fully loaded Tire air pressure Model 7WF25C 230kPa 230kPa Type WDCT Spare tire specifications T145/90R17 Drive Spare tire pressure 420kPa 4.389(5124R gears) Final drive ratio...
  • Page 234 7. Technical data Dynamic balance of wheels Wheel alignment parameters Residual dynamic Name Parameters Name unbalance Individual toe-in 4′±3′ Inside ≤8 g Wheel camber -16′±30′ Front wheel Front wheel Outside ≤8 g Kingpin caster angle 7°12′±45′ Inside ≤8 g Kingpin inclination angle 12°59′±45′ Rear wheel Outside ≤8 g...
  • Page 235 7. Technical data Lamps Lamps Model Power Lamps Model Power License plate lamp High beam Front roof lamp Low beam Rear dome lamp Daytime running lamp * Trunk lamp Front turn signal lamp Ambient light Front position lamp The lamps of the vehicle are LED ones. For replacement =>...

  • Page 236: Fuse Specifications

    7. Technical data 7.5 Fuse specifications Fuse in instrument panel PDU The fuses may slightly vary from vehicle to vehicle. In this regard, the actual vehicle shall prevail.
  • Page 237 7. Technical data Rated Rated Feature/part Feature/part value value GWM / PEPS ECU*/ T-BOX ECU */BCM*/ IF01 Front 12V power outlet IF19 7.5A instrument cluster */ integrated BCM * IF02 7.5A Integrated BCM*/BCM*/PEPS ECU* IF20 7.5A Brake switch AV control uni*/GWM */exterior rearview mirror IF03 7.5A IF21...
  • Page 238 7. Technical data Rated Rated Feature/part Feature/part value value IF55 — — IF37 Integrated BCM*/BCM*/combination instrument IF56 Panoramic sunroof sunshade * Instrument panel switch group-right/instrument IF38 IF57 — — panel switch group-left/PEPS ECU*/EPB switch IF58 — — IF39 BCM* IR01 —...
  • Page 239 7. Technical data Fuse in engine compartment PDU The fuses may slightly vary from vehicle to vehicle. In this regard, the actual vehicle shall prevail.
  • Page 240 7. Technical data Rated Rated Feature/part Feature/part value value EF22 Instrument panel PDU EF01 — — EF23 ESPI EF02 Left front combination lamp * EF03 Right front combination lamp * EF24 IG1 power supply EF04 7.5A Engine control unit EF25 Starter excitation coil/engine control unit EF05 —...
  • Page 241 7. Technical data Rated Rated Feature/part Feature/part value value PCV heater relay (ER01)/PCV heater/canister ER07 — — vent valve/electronic intake air recirculation ER08 — — EF39 valve/canister solenoid valve/oil control valve ER09 — — (intake end)/oil pump solenoid valve/oil control valve (exhaust end) ER10 —...

  • Page 242: Accident Handling

    8. Accident handling 8. Accident handling 8.1 Driver’s tools and spare First-aid packet * Spare tire tire Driver’s tools Take out the spare tire: The first-aid packet contains: Open the liftgate. ① Medical kit: The medical kit contains emergency materials for trauma treatment Lift the trunk carpet. such as hemostatic and bandaging (such Unscrew the central handwheel of the The following tool kit provided by the vehicle...

  • Page 243: Use Of Warning Triangle

    8. Accident handling 8.2 Use of warning triangle Placement distance NOTE Ordinary highway The spare tire has been inflated, and its Expressway tire pressure shall be checked regularly to Daytime Night ensure that it is at the specified maximum ≥50 m ≥80 m ≥150 m pressure, and multiple inspections shall be carried out within 1 year.

  • Page 244: Use Of Reflective Vest

    8. Accident handling 8.3 Use of reflective vest 8.4 Replacement of flat tire NOTE Preparations ● When handling a vehicle accident, it Apply the parking brake. is important to wear a reflective vest as required to draw the attention of Set the gearshift lever to “P” gear. pedestrians or drivers of other vehicles, Switch the vehicle power to the “OFF”...
  • Page 245 8. Accident handling Unscrewing the wheel bolts Lifting vehicle Set the wheel bolt removal wrench on the wheel bolts and loosen the wheel bolts For models equipped with wheel hub Place the jack directly under the spine counterclockwise. trim cover*, remove the trim cover before closest to the flat tire.
  • Page 246 8. Accident handling WARNING WARNING Improper use of jack will cause serious ● The on-board jack can only be used injury. to lift the vehicle, not other heavy objects or vehicles. ● The jack must be used on a hard and flat ground, or a hard backing plate ● When the jack is used, do not start (no higher than 1 cm) can be placed the engine, otherwise an accident will...
  • Page 247 After installing the wheels, you should go ● When replacing a tire, if a bolt is to the GAC Motor authorized shop in time rusted or difficult to tighten, it must to check the tightening torque of the wheel...

  • Page 248: Fuse

    8. Accident handling 8.5 Fuse Engine compartment PDU Replacing fuse Instrument panel PDU Open the engine hood. Pull out or install the fuse using the fuse Press the fixing clip in the direction of puller in the engine compartment PDU. arrow to release the cover of the PDU.
  • Page 249 GAC Motor authorized shop. ● D o n o t r e p l a c e f u s e w i t h m e t a l sheets, paper clips, etc.

  • Page 250: Emergency Start

    8. Accident handling 8.6 Emergency start Jumper cable If the engine cannot be started due to low battery level, the engine can be started by connecting to the battery of the other vehicle via jumper cable. CAUTION Before jumper cable operation, be sure to turn off all electrical equipment of the vehicle with depleted battery, such as Open the engine hood and pull up the...
  • Page 251 8. Accident handling CAUTION WARNING WARNING ● When connecting the battery of two Improper use of jumper cable may cause The jumper cable shall be correctly vehicles, the positive terminals must be battery explosion and serious injury to connected to the positive and negative connected first, and then the negative personnel.

  • Page 252: Vehicle Towing

    Towing by wheel-lift truck from the rear If the vehicle needs to be towed, it shall be done by a GAC Motor authorized shop or a professional towing company. To w i n g b y a r o l l b a c k t o w t r u c k i s recommended.
  • Page 253 8. Accident handling Emergency towing Installing a towing hook If a towing truck cannot be found in an emergency, the towing cable or towing chain can be fastened in the emergency towing eye for temporary towing, but this method is only suitable for low-speed and short-distance towing on solid and flat roads.

  • Page 254: Vehicle Out Of Trap

    8. Accident handling 8.8 Vehicle out of trap Precautions for towing During the emergency towing process, be sure to follow the following items: Before emergency towing, be sure to follow the If the vehicle is trapped on a soft road such as Start the engine and drive at a slow following items: sand, mud or snow, follow the following steps...
  • Page 255 This manual describes the configuration, function, performance parameters, product schematic diagram and other related information of the whole series of GAC Motor. The contents are valid at the time of printing. However, the actual configuration and function of the vehicle shall be subject to the delivered vehicle. If there is any difference between the product schematic diagram and the delivered vehicle, the actual product shall prevail. GAC Motor Co., Ltd. reserves the right to change, supplement or terminate the contents and technical specifications in this manual without prior notice. GAC Motor Co., Ltd. owns the copyright of this manual. Without the written consent of the GAC Motor Co., Ltd., the contents of this manual shall not be photocopied or extracted.

Table of Contents

Save PDF