Remote Controller; Preparation - Kenwood DMX7722DABS Instruction Manual

Remote Controller

Remote Controller
To use the remote controller, purchase optional
remote controller, KCA-RCDV340.
• When using the remote controller, refer also to
the instruction manual supplied with the remote
controller.
Remote sensor*
* DO NOT expose the remote sensor to bright
V.SEL
MODE FNC/PBC
DVD SETUP RETURN
light (direct sunlight or artificial lighting).
AUDIO ANGLE
KCA-RCDV340
46
ENGLISH
CAUTION
• Do not leave the remote controller in hot places such
as on the dashboard.
• Risk of the fire of explosion if the battery is replaced
by an incorrect type. Ensure to replace only with the
same type.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is left in an extremely
high temperature surrounding environment and/
or subjected extremely low air pressure. The battery
pack or batteries shall not be exposed to excessive
heat such as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is disposed into fire or a
hot oven, recharged, shorted, mechanically crushed
or cut of the battery.
• If spilled fluid comes in contact with your eyes or on
clothing, immediately rinse with water and consult
a physician.

Preparation

Battery installation
Use two "AAA"/"R03"-size
batteries.
Insert the batteries with the +
and – poles aligned properly,
following the illustration inside
the case.
• Always insert batteries from
– poles to avoid bending the
springs.
• If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace
both batteries with new ones.
Remote Controller mode switch
The functions operated from the remote controller
differ depending on the position of the mode switch.
AUD•
DVD•
T V•
• AUD mode: Switch to this mode when controlling a
selected source or tuner source, etc.
• DVD mode: Not used.
• TV mode: Not used.