Pc Version; Calibrating Your Monitor - NEC DiamondPro 2070SB User Manual

Calibrating Your Monitor

PC VERSION

Launch the SpectraView program.
While the SpectraView software is loading, it will initialize the monitor and the
color calibrator for adjustment. This process takes approximately 30 seconds to
complete but may vary based on system performance.
Note: If one of these two devices aren't detected an error screen will appear asking
you to check the connection.
Figure 3a
If this is the first time that SpectraView has run, the monitor will be uncalibrated.
To perform a calibration, click "Calibration" in the software menu (Figure 3a).
SpectraView allows you to specify the parameters you would prefer to use for
calibration. These parameters (color temperature, gamma, and white luminance)
are contained in "Presets" which are small files containing these values.
SpectraView ships with two Presets already installed, sRGB and D50. You may
select a Preset for calibration by clicking on the "Preset" pulldown in the lower-
left corner of the CALIBRATE panel. You may also create your own Presets through
the process described in Section 4: Creating a Custom Preset.
16