CyberPower CST135UC2 Setup Manual

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 | CyberPowerSystems.com
4
YOUR ULTIMATE ALLY IN POWER
SMART APP UPS SERIES
CST135UC2
LCD FUNCTION SETUP GUIDE
LCD OPERATION GUIDE
Display Interface
On Battery Indicator Sensitivity Meter
1 12
Battery Capacity Estimated Run Time
2 13
Battery Fault Indicator Output Meter
3 14
Mute Button Input Meter
4 15
Online Indicator
5
Energy-Saving Icon
6
AVR Indicator
7
Fault Indicator
8
Schedule
9
Current Load Indicator
10
Overload Indicator
11
Basic Operation
Power On:
Press and hold the POWER Button. You will hear a constant
tone for 1 second, followed by a short beep. Release the button
after the short beep.
Power Off:
Press the POWER button for approximately 2 seconds. You will
hear a constant tone for 1 second followed by 2 short beeps.
Release the button after 2 short beeps.
Setup Mode
Press and hold the DISPLAY Button for approximately
3 seconds to access the setup mode's 12 functions. Use the
same button to select the functions to configure:
* Utility Quality
* High Transfer Voltage
* Low Transfer Voltage
* Sensitivity
* Low Battery Warning
* Self-Test
* Non-Critical Load
* Buzzer
* LCD Sleep
* Last Fault Reason
* Back to Default Settings
* Back to Status Display
© Cyber Power Systems (USA), Inc.
1 2 3
4 5 6 7 8
9 10 11
12
13
14
15
Setup Mode - cont.
Select Function:
When a function is selected, press DISPLAY Button for
3 seconds to view the options.
Confirm Option:
When an option is selected, press the DISPLAY Button for
3 seconds. After the setting has been confirmed, "SETTING"
will stop flashing.
Escape Option / Function (ESC):
Option Menu:
Select this option and press the DISPLAY Button for 3 seconds
to go back to the Function Menu.
Function Menu:
Select this function and press the DISPLAY Button for 3
seconds to go back to the Status Display.
After 30 seconds of no activity, the LCD will leave setup display.
The setting will not be confirmed.
1