NICHIYU FBRF14 75 Series Operator's Manual page 42

3
DRIVING AND OPERATION
2) Turning
Make sure that the truck turning clearance is enough,
slow the speed down and turn the steering wheel care-
fully.
3
3) Electric brake (Plugging brake)
The electric brake is applied when changing the direc-
tion of the directional switch while traveling. If the
accelerator pedal is kept to depress, the truck is trav-
eled to the opposite direction after stopping momently.
The braking force can be adjusted by the depressing
angle of the accelerator pedal.
4) Stopping
Release the accelerator pedal and depress the brake
pedal gradually by right foot.
Do not stop suddenly.
CAUTION
● Sudden stop can cause falling loads.
5) Parking
When parking the forklift truck, completely retract the
mast, tilt down the fork and lift down the fork to the
ground.
Do not park the forklift truck on a slope.
When leaving the forklift truck, remove the key.
35