Power Up and Logon a Handheld
Unit
Action
1 Make sure the battery in the handheld unit is fully
2 Press and hold ª until the unit powers on. The
Welcome Screen
Select a service
AIM
To logon a handheld unit:
• If your handheld can see an active base that you
previously registered with, you are asked to select a
service. Push the option key below AIM, then login
using your AIM screen name and password.
• If your handheld cannot see an active base that you
previously registered with, you will see a message
stating that it could not contact the base. Move closer
32
charged.
Welcome screen displays and the Power On
alert sounds.
Copyright 2002
Patents Pending
Welcome!
MX240a V1.0
Motorola