Motorola MX240a User Manual page 10

Battery Charger Safety Instructions
Save these Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate or disassemble the charger if it has received
a sharp blow, or has been dropped or damaged in any way.
3. Never alter the AC cord or plug provided with the unit. If plug
will not fit the outlet, have proper outlet installed by a qualified
electrician. An improper condition can result in a risk of
electric shock.
4. To reduce risk of damage to cord or plug, pull the plug rather
than the cord when disconnecting charger from AC
receptacle.
5. To reduce the risk of electric shock, unplug the charger from
the outlet before attempting any maintenance or cleaning.
6. Use of an attachment not recommended or sold by Motorola
may result in a risk of fire, electric shock, or personal injury.
7. Make sure that the cord is located so that it will not be
stepped on, tripped over, or subjected to damage or stress.
8. An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result in
a risk of fire and/ or electric shock. If an extension cord must
be used, make sure that:
• The pins on the plug of the extension cord are the same
number, size and shape as those on the plug of the
charger.
• The extension cord is properly wired and in good
electrical condition.
• The cord size is 18 AWG for lengths up to 100 feet, and
16 AWG for lengths up to 150 feet.
9. The supply cord of this charger cannot be replaced. If the
cord is damaged, call Motorola Product Services at
1-800-353-2729 in the USA or 1-888-390-6456 TTY (Text
Telephone).
9