Time Clock; Overview - Fancom LUMINA 71 User Manual

Lumina 71
8.

Time clock

Time clocks can be used to activate/deactivate equipment. Various time periods can be entered per time clock. For
example, use one time clock to activate equipment from 9:00 to 11:00, from 12:00 to 14:00 and from 16:00 to 18:00.
8.1

Overview

Description
Situation
On
Off
Status
In the system settings, the installer has set what happens in the event of a power out (whereby an active
time clock is interrupted). Compensate for this interruption later by extending the time period. Contact
your installer for more information.
 tab page
Time clock Overview
Readout of the name of the time clock.
Readout of the time clock status (ON/OFF).
Setting the start time of the time clock.
Setting the end time of the time clock.
Setting of the time clock status:
•
FREE: The control computer can run the time clock.
•
BLOCKED: The control computer will skip the time clock.
•
ONCE: The time period will be run once on the next occasion that the on time of
the time period is reached. Afterwards, the control computer sets the status to
BLOCK.
•
SKIP: The time period will be skipped next time. Afterwards, the control computer
sets the status to FREE.
 tab page
Time clock Set
Time clock
26