Motorola DCT2000 Installation Manual page 37

I n s t a l l a t i o n
O p e r a t i o n a l C h e c k
The operational check tests the communication link between the remote control and the
DCT 2000. The procedures verify the DCT 2000 response to remote control commands.
Table 3-2 lists the operational check procedures:
Power on
Channel Selection
Volume Control
If the DCT 2000 does not operate properly, refer to Section 5, "Troubleshooting."
§
Press to turn on the DCT 2000.
POWER
§
Turn on the TV and tune it to the output channel of the DCT 2000 (channel 3 or 4).
§
Scan through the channels using the
keys on the remote control.
§
Tune to several channels by entering the channel number with the numeric keys on the remote
control.
§
Use the TV volume control to adjust the sound volume to a moderate level.
§
Press + - on the remote control to increase the volume to its upper limit, lowest level, and
VOLUME
to a comfortable level.
§
Press to turn the sound completely off. Press
MUTE
keys on the DCT 2000 and the
CHANNEL
again to restore the sound.
MUTE
+ -
CHANNEL