Motorola DCT2000 Installation Manual page 21

I n s t a l l a t i o n
S t a n d a r d C a b l i n g D i a g r a m
The DCT 2000 will output on either channel 3 or 4 depending on the configuration message
from the control system. Figure 3-1 illustrates a standard diagram connecting the DCT 2000 to
a TV using RF connectors:
AUDIO
IN
R L
AUDIO
VIDEO
CABLE IN OUT
IN
R L
TV
The remodulated channel, 3 or 4, does not carry stereo for digital channels. Connect the
DCT 2000 using RCA baseband connectors to receive stereo on digital channels. These
connections are illustrated later in this section.
From cable outlet
SVIDEO
IN
DATA