Delphi DS150e Quick Start Manual

Congratulations on the purchase of your new Delphi DS150e Diagnostic system!
Installing the software
1
From the DVD menu click on « PC -
SW »
4
The Licence Activation Tool runs, click
start to activate your license
7 Select the product you wish to install
« DS Cars » or « DS Heavy duty ». If
both are required the installation must
be performed twice (one for each)
delphiautoparts.com
x.x.x.x
2
Click on Diagnostic SW Install (Ensure
your dongle is fitted on a USB port at
this point)
5
Internet connection is required for
activation. It won't be possible to go
further without internet connection
8 Check that System requirements match
computer configuration, tick the
checkbox and click Next
Air Conditioning | Braking | Diagnostics | Diesel | Engine Management | Fuel | Ignition | Maintenance | Steering & Suspension
Quick Start Guide
3
6
9
1 / 2
DS150e
Select the installation language
(doesn't determine the display
language of the software)
The current subscribed licenses are
shown, check they are correct and
click Next
Select the desired folder, click install
and wait for the installation to
complete. It is recommended not to
change the destination folder.
©2015 Delphi Automotive PLC. All rights reserved.
DDGX236(EN)