Testing The Ied Operation; Selecting The Ied Test Mode - ABB ABILITY SSC600 Operation Manual

Smart substation control and protection for electrical systems

Hide thumbs Also See for ABILITY SSC600:

Table of Contents

Commissioning

3.5

Testing the IED operation

The IED has to be in the test mode before the digital outputs and certain output

signals of protection and other functions can be activated.

3.5.1

The test mode can be activated by activating the IED test view. The test mode is

useful for simulated testing of functions and outputs without providing current

inputs.

Select IED test from the main menu structure to activate the IED test view.

Figure 4: IED test view

Enable parameter editing by selecting Enable Edit.

Select the test mode to be activated by changing the New Value field selection.

Select Write to device to save changes into the IED's memory.

The selected test mode is now activated.

1MRS758850 D

SSC600

Operation Manual

Table of Contents