Additional Safety Instructions For Lasers - DeWalt DW089 User Manual

DW 089/ D W089CG
• Do not place the laser in a position which may cause anyone
E
• Do not position the laser near a reflective surface which may
• Turn the laser off when it is not in use. Leaving the laser on
• Do not remove or deface warning labels. If labels are removed
• Position the laser securely on a level surface. Damage to the

Additional Safety Instructions for Lasers

• This laser complies with class 2 according to EN 60825-1:2007.
• Do not use the laser for any purpose other than projecting laser
10
DW089_DW089CG - User Manual - NA - May 2018.indd 10
to intentionally or unintentionally stare into the laser beam.
Serious eye injury could result.
reflect the laser beam toward anyone's eyes. Serious eye injury
could result.
increases the risk of staring into the laser beam.
user or others may inadvertently expose themselves to radiation.
laser or serious injury could result if the laser falls.
WARNING: Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING: Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
WARNING: DO NOT DISASSEMBLE THE LASER.
There are no user serviceable parts inside. Disassembling
the laser will void all warranties on the product. Do not
modify the product in any way. Modifying the tool may
result in hazardous laser radiation exposure.
WARNING: Fire hazard! Avoid short-circuiting the contacts
of a removed battery.
Do not replace a laser diode with a different type. If damaged,
have the laser repaired by an authorised repair agent.
lines.
5/25/2018 10:40:47 AM