Table of Contents
Advertisement
Changing the light bulb
,
To reduce the risk of electric
shock, disconnect this appliance
from the power supply by shutting
off the power main or tripping the
circuit breaker.
The bulb cover is comprised of two
parts: a glass cover and a frame.
Hold the bulb cover firmly so it does
not fall. As a precaution, place a
dish towel on the floor of the oven
and the open door.
^ Unscrew the bulb cover with a Torx
screwdriver (T20) and remove the
cover.
^ Pull out the halogen bulb.
Frequently asked questions
Only use the following light bulb:
12 V, 10 W, 572 °F (300 °C) heat
resistant, socket G4, type 64418
made by Osram.
Do not touch the new light bulb with
your fingers; touching the bulb will
reduce its life. Follow the bulb
manufacturer's instructions.
^ Insert a new halogen bulb.
^ Place the glass cover into the frame
and fasten the bulb cover: Insert the
tip of the frame into the recess in the
oven ceiling. Press the frame into the
oven ceiling and tighten the screw.
^ Restore power to the appliance
45
Advertisement
Table of Contents
