Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
4.4.4
4.4.5
4.4.6
4.4.7
Operating Instructions Web512 V2.6.x for Web-server II 1598
State = -
Info: A hyperlink to open a document, a drawing etc. for more
information regarding the alarm point.
Camera: A hyperlink to a web camera.
If the list is "full" click Next to see the next list and Prev to see
previous list.
Co-incidence
In case of a co-incidence alarm (Value > 0 and yellow indication), e.g.
one "two-address dependent alarm", click Co-incidence or
view the Co-incidence Alarm view / list.
The Time (date & time), Zone – Address and Text (alarm text) are
displayed.
Source = Smoke, Heat, Multi, MCP or Other.
State = -
Info: A hyperlink to open a document, a drawing etc. for more
information regarding the alarm point.
Camera: A hyperlink to a web camera.
Click Reset All to reset all co-incidence alarms. (Require log-in on
User level 3 or higher.)
Click Reset to reset the co-incidence alarm respectively. (Require
log-in on User level 3 or higher.)
If the list is "full" click Next to see the next list and Prev to see
previous list.
Faults
In case of one or more faults (Value > 0), click Faults or Fault List
(yellow font colour) or
See chapter "Fault List", page 17.
Disablements
In case of one or more disablements (Value > 0), click Disablement
(yellow font colour) or
view.
See chapter "Disablement", page 17.
Interlockings
In case of one or more activated interlocking input / output (Value >
0), click
to view the Activated Interlocking Comb. view.
List
to view the Fault list view.
List
to view the Disablement – Summary
List
15
to
List
Advertisement
Table of Contents
