Table of Contents
Advertisement
10.1.4 Set operating mode
The operating mode can be set for pre-selected units via the Operating
mode area in the sidebar.
The following operating modes are supported:
Icon
To set the operating mode for selected units:
▶ Select the symbol (greyed out) for the required operating mode.
The operating mode is displayed in colour with the selected units in
the View of units area on the Basic settings page.
9 "Operating units"
9.4 "Selecting and deselecting units for editing"
9.3 "Display of units"
10.1.5 Adjusting the set temperature
The set temperature for pre-selected units can be set via the Set
temperature area in the sidebar.
The Set temperature area appears if one of the following operating
modes is set:
• Cooling mode
• Dehumidification mode
• Heating mode
To adjust the set temperature for selected units:
▶ Drag the rotary control in the
directly at any point until the required set temperature (value in the
centre) is displayed.
-or-
▶ Drag the rotary control in the
directly at any point until the required set temperature (value in the
centre) is displayed.
The new set temperature is displayed for the selected units in the
Units view area on the page Basic settings.
Alternatively, the set temperature can also be adjusted as follows:
▶ Select
or
until the required set temperature is obtained.
10.1.4 "Set operating mode"
9 "Operating units"
9.4 "Selecting and deselecting units for editing"
Turbo heat/Turbo cool
If the + or - key is pressed for longer, the Turbo heat or Turbo cool
function is activated for 30 minutes.
▶ Press and hold
to activate the Turbo heat function for 30
minutes.
▶ Press and hold
to activate the Turbo cool function for 30
minutes.
Air Center Control – 6720892123 (2020/06)
Operation mode
Cooling mode
Dry mode
Heating mode
Fan Mode
direction or tap the semicircle
direction or tap the semicircle
10.1.6 Adjusting the fan speed
The fan speed can be adjusted for pre-selected units via the Fan speed
area in the sidebar.
The fan speed can only be selected and set if one of the following
operating modes is set:
• Cooling mode
• Heating mode
• Fan Mode
There are 7 fan speeds: 1 is the lowest and 7 is the highest fan output.
The fan speed Auto also exists. In Auto mode, the fan speed is
automatically adjusted as soon as the set temperature deviates from the
room temperature.
To adjust the fan speed for selected units:
▶ Select the bar that corresponds to the desired fan speed.
All bars up to the desired fan speed are displayed in green.
-or-
▶ Select Auto.
The fan speed for the selected units is displayed in the area View of
units on the page Basic settings as a number or as Auto.
10.1.4 "Set operating mode"
9 "Operating units"
9.4 "Selecting and deselecting units for editing"
10.1.7 Exiting the settings sidebar Settings
To return to the Groups area (after editing the units):
▶ Deselect all units.
The Groups area (groups/floor plans) appears.
9 "Operating units"
12 "Floor plans/Floor plan editor"
9.4 "Selecting and deselecting units for editing"
10.2
Advanced settings
Advanced settings can be made for selected units via the Settings
sidebar.
To call up the advanced settings:
▶ Select
.
The menu containing the advanced settings appears.
9.4 "Selecting and deselecting units for editing"
10.2.1 Overview of advanced settings
Description
Description/Reference
Lock manager
• Locking the settings for selected units.
10.2.2 "Lock Manager"
Assign to schedule
• Assign selected unit or units to a
10.2.3 "Assign to schedule"
New schedule
• Create new schedule.
10.2.4 "New schedule"
Settings sidebar
schedule.
17
Advertisement
Table of Contents
