Chapter 2. Set Up Rear Door Heat Exchanger V2 - Lenovo ThinkSystem Rear Door Heat eXchanger V2 User Manual

Chapter 2. Set up Rear Door Heat eXchanger V2

See this topic to learn how to install and set up ThinkSystem Rear Door Heat eXchanger V2.
About this task
Follow the instructions in the section corresponding to the installation scenario:
• If Rear Door Heat eXchanger V2 comes when installed to the rack, see
Heat eXchanger V2 that comes with the rack" on page 6
• To replace a regular rear door with Rear Door Heat eXchanger V2, see
Door Heat eXchanger V2" on page
Important: Make sure to plan the cooling system with consideration of
secondary cooling loop" on page
S010
CAUTION:
Do not place any object weighing more than 82 kg (180 lb) on top of rack-mounted devices.
S019
CAUTION:
The power-control button on the device does not turn off the electrical current supplied to the device.
The device also might have more than one connection to dc power. To remove all electrical current
from the device, ensure that all connections to dc power are disconnected at the dc power input
terminals.
R007
© Copyright Lenovo 2021
8.
17.
"Complete setup of Rear Door
to complete the setup procedure.
"Replace a regular door with Rear
"Water specifications for the
5