Hitachi IJ UX2 User Manual page 13

Function
No use
Tunnel communication
Tunnel communication (Output)
LAN Function
Modbus communication
OPC-UA communication
EtherNet/IP communication
Sets IJ Printer's IP address.
*192.168.251.0 to 192.168.255.255 cannot be set to the IP address of the IJ
IP address
printer.
Sets IJ Printer's Subnet address.
Subnet mask
Sets IJ Printer's Default gateway.
Default gateway
*192.168.251.0 to 192.168.255.255 cannot be set to the default gateway.
Sets IJ Printer's Port No.
Port No
* Tunnel communication:
1024 to 59999 can be set to Port No.
* Modbus communication
502 and 1024 to 59999 can be set to Port No.
* Port No. is fixed to 4840 for OPC-UA Communication
* Port No. is fixed to 44818 for Ethernet/IP Communication
Displays IJ Printer's MAC address.
*It is a number registered to identify the device on the network.
MAC address
The MAC address consists of 12 digits like 01-23-45-67-89-AB and cannot
be changed.
Setting item of LAN communication
Description
LAN function cannot be used.
Tunnel communication function can
be used
Only communication of Special
communication function A can be
used as Tunnel communication
function.
Modbus communication function
can be used
OPC-UA communication function
can be used.
EtherNet/IP communication
function can be used.
12
Default
No use
192. 168. 0. 1
255. 255. 255. 0
0. 0. 0. 0.
1024
Device-specific and cannot
be changed