Related Manuals for Panasonic HG-F1 Series
Summary of Contents for Panasonic HG-F1 Series
- Page 1 Compact & Long Range Laser Distance Sensor HG-F1 SERIES Conforming to FDA regulations Certified by NRTL Pinpoint detection from 9.843 ft away 2022.12...
-
Page 2: Compact Design
Compact & Long Range Laser Distance Sensor HG-F1 Series The laser distance sensor HG-F1 series features a lightweight and high-strength aluminum diecast case with a built-in TOF sensor module. The sensor unit boasts a compact and robust body and offers a long-range sensing capability. - Page 3 (Measuring distance 400 to 600 mm 15.748 to 23.622 * The sensing object used for the HG-F1 series was a sheet of white non-glossy paper measuring 200 × 200 mm 7.874 in × 7.874 in and the sensing object used for the HG-C series was white ceramics.
- Page 4 When multiple sensor units are used, the conventional adjuster setting method requires the adjustment of each sensor in actual usage condition. With the HG-F1 series, the distance (numeric value) set in the first sensor unit can be used as a guideline for setting the distance in the second and other sensor units.
- Page 5 * The above beam diameters are typical values. Confirm the appropriateness of the beam diameter in actual installation condition. * The beam diameter may be affected by the materials of surrounding objects and their distances. * The typical beam diameter of the EQ-501 / EQ-511 is used as the diameter of the EQ-500 series. Panasonic Industry Co., Ltd.
-
Page 6: Useful Functions
4 to 20 mA zero set setting will be cancelled. Analog ground (shielded) * If an error occurs, the zero set function cannot be set. * An external input can be used to set the zero set function. Panasonic Industry Co., Ltd. - Page 7 Shown above are application examples. Note that detection may not be possible in some cases due to the shapes, color, luster, etc. of the workpieces used by the customer. Be sure to confirm proper operation with actual machines. If the sensors fail to detect, consult our sales office in charge. Panasonic Industry Co., Ltd.
-
Page 8: Order Guide
Valid: 0 to +1.2 V DC Valid: +4 V to +V DC Note: Insulate the unused terminals in order to prevent input errors and Note: Insulate the unused terminals in order to prevent input errors and short-circuits. short-circuits. Panasonic Industry Co., Ltd. -
Page 9: Specifications
7) Analog output is not included. 8) Do not use or store this product in environments where ambient air is pressurized to an air pressure higher than the atmospheric pressure at an altitude of 0 m. Panasonic Industry Co., Ltd. - Page 10 118.110 Measuring distance (mm in) * White: Non-glossy paper (200 ×200 mm 7.874 × 7.874 in, N9 to N9.5, reflectance: approx. 80%) Gray: Non-glossy paper (200 × 200 mm 7.874 × 7.874 in, N5, reflectance: 19.27%) Panasonic Industry Co., Ltd.
-
Page 11: Precautions For Proper Use
• The display automatically returns to the measurement display when 2 minutes elapse after the sensor is set to the “emitted beam spot check mode”. To continue to adjust the beam axis, hold down the UP key for 3 seconds or longer again to set the “emitted beam spot check mode”. Panasonic Industry Co., Ltd. -
Page 12: Installation
• When this product becomes unusable or unnecessary, dispose of the internal memory of the product and may disable the product the product properly as industrial waste in accordance with the from restarting. applicable law in the country. Panasonic Industry Co., Ltd. - Page 13 List of Setting Items • The following items can be set in the product. For the method of setting each item, refer to the User’s Manual for HG-F1 Series. * The User’s Manual can be downloaded from our website. Item...
-
Page 14: Error Indication
The beam emitting part or the beam receiving Turn the power OFF and then ON. If the sensor does not recover Er51 part is abnormal. after the above action, consult your Panasonic representative. Er90, Er91, Er92, Er93, The product could be faulty. -
Page 15: Assembly Dimensions
= 1.5 0.059 1.181 0.709 Beam emitting part 0.315 0.709 2-ø3.2 ø0.126 0.866 1.457 2.283 34.5 1.358 0.630 0.551 1.181 Material: Stainless steel (SUS304) Two M3 (length 25 mm 0.984 in) screws with washers (SPCC) are attached. Panasonic Industry Co., Ltd. - Page 16 Panasonic Industry Co., Ltd. Industrial Device Business Division 7-1-1, Morofuku, Daito-shi, Osaka 574-0044, Japan industrial.panasonic.com/ac/e/ Specifications are subject to change without notice. 2022.12 ⓒ Panasonic Industry Co., Ltd. No. CE-HGF1-3 Printed in Japan...