Basic Installation and Operation
Guide
SP.13 Calibration & Service (Setpoint Page 13)
(Security Level 3)
Certain screens are displayed for user information only, such as Current date and time, Model number and Firmware
revision number. Setpoint changes in this page will only be accessible to factory personnel.
SP13.1 Set Date and Time: Displays the date and time.
Enter Date (DDMMYYYY): Allows the factory personnel to program the date for the soft starter in the format shown.
•
Enter Time (HH:MM): Allows the factory personnel to program the time for the soft starter.
•
SP13.2 Model & Firmware #: Displays the model number and firmware revision in the soft starter.
SP13.3 Press Enter to Access Factory Settings: Available to qualified personnel.
MENU
(DOWN ARROW 12 TIMES)
PAGE 13
CALIBRATION &
SERVICE
TOSHIBA
SET DATE AND TIME
##/##/## ##:##
MODEL #: ######
FIRMWARE REV. #: ######
PRESS ENTER TO ACCESS
FACTORY SETTINGS
JKSSS Series Solid State Soft Starters
ENTER DATE (DDMMYYYY)
##/##/####
Range: D = 1 - 31, M = 1-12,
Y = 1970 – 2069
Increments of 1
ENTER TIME (hh:mm)
:##:##
Range: H = 00 - 23,
M = 0 - 59
Increments of 1
70