Samsung PE40C User Manual page 137

6
3
4
How to set up manually
To set up your product cable network connection manually, follow these steps.
1
2
3
4
5
6
7
8
9
10
11
12
Great user manuals database on
Network
On the dialog that appears, click the Support tab.
On the Support Tab, click the Details button. The Network connection values are displayed.
Go to the Network Settings
Select Start, press [ ], and then press [
verification process starts.
Press [ ]. The verification process stops. Select
IP Settings screen appears.
Select the field at the top, press [
Press the button on your remote to go to the
Enter the first portion of the
keys on your remote. Press the right arrow button to go to the next field.
Enter the next portion of the
Repeat the entry process for each field in the
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the up or down arrow button to change the number one unit at a time.
When done entering the IP
Press the down arrow key to go to the
Repeat the same entry process for
When done, select OK at the bottom of the page, and then press [
appears and the verification process starts. When the connection has been verified, the
connected successfully." message appears.
UserManuals.info
screen.
] again. The network test screen appears and the
IP Settings
], and then set IP Settings
IP Address
IP Address (for example, 105) into the first entry field using the number
IP Address. Press the right arrow button to go to the next field.
IP Address.
Address, press [ ].
Subnet Mask
Subnet Mask, Gateway, and
on network connection screen. The
to Enter manually.
entry field, and then press [
fields, and then press [ ].
DNS Server.
]. The network test screen
].
"Internet is
137
6 Network