Zoom/Position - Samsung PE40C User Manual

4




Picture Sizes available by Input Source.

4.3.2 Zoom/Position

Adjusts the picture position.
or Screen

1
2
3
4
5

Great user manuals database on
Screen Adjustment
4:3: Sets the picture to basic (4:3) mode.
Do not set your product to 4:3 format for a long time. The borders displayed on the left and right,
or top and bottom of the screen may cause image retention (screen burn) which is not covered by
the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or
Component (1080i / 1080p) signals are inputted.
Custom: Changes the resolution to suit the user's preferences.
Original ratio(Original Ratio): If the input source is PC, DVI,
DisplayPort, the video will display in the original aspect ratio.
Available ports may differ depending on the model. (page 30)
You can adjust and store settings for each external device you have connected to an input on the
product.
Input Source
AV, Component (480i, 480p)
Component (1080i, 1080p)
HDMI (720p, 1080i, 1080p)
PC, DVI, DisplayPort,
HDMI(when a PC is connected)
Position
fit.
To use the Position function after selecting Zoom1, Zoom2,
steps.
Press the button to select Position.
Press the [ ] button.
Press the or button to move the picture up or down.
Press the [ ] button.
Select Close by pressing the
Reset.
To use the Zoom/Position
Component (1080i/1080p) or Custom, follow these steps.
UserManuals.info
16:9, Zoom1, Zoom2, 4:3,
16:9, Wide
16:9, Smart View
4:3, Screen
16:9, 4:3,
is only available if Picture Size
and buttons sequentially. To reset the picture position, press
function after selecting Screen Fit
HDMI (PC connection), or
Picture Size
Custom
Fit, 4:3, Screen Fit, Custom
1, Smart View 2,
Fit, Custom
Original ratio(Original Ratio)
is set to Zoom1, Zoom2,
Wide Fit or Screen fit
in HDMI (1080i/1080p) or
4 Screen Adjustment
Wide Fit,
Wide Fit
follow these
120