Related Manuals for Euromatic WFHV45
Summary of Contents for Euromatic WFHV45
- Page 1 45 cm Industrial Wall Fan INSTRUCTION MANUAL Model Number WFHV45 AFTER SALES SUPPORT (AU) 1300 886 649 (NZ) 0800 836 761...
-
Page 2: Table Of Contents
Contents Important Safety Instructions Product Overview Getting Started Instructions Other Useful Information After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support... -
Page 3: Important Safety Instructions
Important Safety Instructions READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. - Page 4 Important Safety Instructions (Cont.) • WARNING! Do not leave unattended during use! Always switch it off and unplug when not in use, if left unattended, and before cleaning and storing. • Guard removal: Ensure the fan is disconnected from the power supply before removing a guard (grille).
- Page 5 Important Safety Instructions (Cont.) • WARNING! Do NOT use the fan in the following areas or circumstances: - near an open flame, a hot burner, oven or other source of high heat - outdoors or in areas of high humidity without suitable ventilation (such as in a bathroom, laundry area) or near a sink, washer, pool or any source of water - in a window or near curtains...
-
Page 6: Product Overview
Product Overview Scope of delivery Wall fan Documentation (not shown) Front grille cover Instruction Manual Front grille Warranty Card Fan blade NOTE: Due to continued product Screws (TM5*8) x4 improvement, images and illustrations in this Back grille manual may vary slightly from the product Body purchased. -
Page 7: Getting Started
Getting Started Unpacking • This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. - Page 8 Getting Started (Cont.) Assembly • Attach the rear net to the fuselage with four TM5*8 screws (Fig. 1). • Fix the fan blade to the shaft core with the TM6*10 screw (Fig. 2). Fig. 1 Fig. 2 • Align the front net with the rear net (Fig. 3). Fig.
- Page 9 Getting Started (Cont.) Wall-mounting instructions Please consult a builder or other qualified professional if you are in doubt about the suitability of your wall. IMPORTANT! • Your wall must be structurally sound and sturdy enough to support the weight of the fan. An electrical outlet socket should be in easy reach. •...
- Page 10 Getting Started (Cont.) Introduction This fan is equipped with 3 fan speeds, 3 breeze modes, a 0.5–8 hr timer, an oscillation function and the fan head can be tilted up/down. You can use the control panel (Fig. 9) to access most functions, except for selecting a breeze mode.
-
Page 11: Instructions
Instructions Using the fan (See page 10, Fig. 10 and Fig. 11) Make sure the fan switched to the OFF position, then insert the power plug into an appropriate electrical outlet and switch on the power at the outlet. • ON/OFF: Press the ON/OFF button to switch on the fan. At first operation it will start at Low speed. -
Page 12: Other Useful Information
Other Useful Information WARNING! • Before cleaning, maintenance or moving the fan, and before removing a front or rear grille, switch off the fan and unplug it from the wall outlet. • Do not immerse the fan in water or other liquids. Do not spray it with liquids. - Page 13 Other Useful Information (Cont.) Technical specifications Rated power 135 W Rated voltage 220–240 V ~ Rated frequency 50-60 Hz Fan speeds 3 (Low - Medium - High) Dimensions (approx.) 500 x 500 x 420 mm Weight (approx.) 4.68 kg The RCM Mark (Regulatory Compliance Mark) indicates that the product complies with the relevant guidelines of the ACMA as well as corresponding government requirements for the safety of electrical devices.
- Page 14 This page has been left blank intentionally. After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support...
- Page 15 This page has been left blank intentionally. After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support...
- Page 16 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 for advice.
Need help?
Do you have a question about the WFHV45 and is the answer not in the manual?
Questions and answers