Related Manuals for Euromatic DF-EF1050AG2
Summary of Contents for Euromatic DF-EF1050AG2
- Page 1 AIR CIRCULATOR Heating and Cooling INSTRUCTION MANUAL Model Number DF-EF1050AG2 AFTER SALES SUPPORT (AU) 1300 886 649 (NZ) 0800 836 761...
-
Page 2: Table Of Contents
Contents Important Safety Instructions Product Overview Getting Started Instructions Other Useful Information After Sales Support 1300 886 649 | info@tempo.org... -
Page 3: Important Safety Instructions
Important Safety Instructions READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instruc- tions and warnings. - Page 4 Important Safety Instructions (Cont.) • Plug: It is normal for the plug to feel warm; however, a loose fit between the AC outlet and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace a loose outlet. • After use: Switch off the appliance at the rocker switch and unplug it from the power outlet when it is not in use and before cleaning, servicing, moving or storing the appliance.
- Page 5 Important Safety Instructions (Cont.) • Usage restriction: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experi- ence and knowledge, unless they have been given supervision or instruction con- cerning the use of the appliance by a person responsible for their safety.
-
Page 6: Product Overview
Product Overview Scope of delivery Angled front view Angled rear view Air circulator - heating and cooling Front grille Blade (behind the grille) Upper base Control panel with LED display (see page 7 for details) Lower base Remote control ON/OFF switch Dust filter (behind the rear cover) Rear cover Documentation... - Page 7 Product Overview (Cont.) Control panel Remote control Operation buttons and indicators Power/Standby Wind speed adjustment: strong, high, medium, low Timer: 1h, 2h, 4h, 8h Oscillation: motorised horizontal swing around 80 degrees; manual tilt upward around 90 degrees Heating: High (2000W), Low (1000W), Eco Sleep mode (in Fan mode only) NOTE: Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased.
-
Page 8: Getting Started
Getting Started Unpacking • Packaging: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. -
Page 9: Instructions
Instructions Features • The appliance can be operated as a heater or as a cooling fan. • It can be operated either manually using the control panel on the upper base, or remotely via the supplied remote control. • The appliance is equipped with four wind speeds (strong, high, medium, low), an off-timer with four settings (1h, 2h, 4h, 8h), and horizontal oscillation (80°). - Page 10 Instructions (Cont.) Switching on/standby • Set the rocker switch at the back of the appliance to the ON [ I ] position to set the heater into standby mode. Once electricity is supplied, the heater will emit two short beep sounds. In standby mode, only the POWER/STANDBY button will be operational.
- Page 11 Instructions (Cont.) Oscillation (swing) The appliance has an oscillation (swing) function, which you can set to help distribute the air over a larger area. It will work in any mode. Always switch off the oscillation function before you tilt the appliance upwards and before you switch off the appliance.
- Page 12 Instructions (Cont.) • In heating mode: – The product runs in the following cycle order: cold wind / low-gear --- warm wind / high-gear --- warm wind / ECO function --- medium speed / cold wind --- low-gear / warm wind ..–...
- Page 13 Instructions (Cont.) Safety features Overheat protection and prevention An internal overheat protection system will shut down power to the appliance if the internal parts get too hot (above 70˚C). All indicators will extinguish and all functions will stop. The internal temperature must have dropped to a safe level before the heater will restart.
-
Page 14: Other Useful Information
Other Useful Information Battery replacement When the button cell in the remote control needs to be replaced, pull out the button cell holder and insert a fresh button cell with the (+) marking facing upwards. Then push the holder with the button cell back into the unit. WARNING! Keep batteries out of reach of children. - Page 15 Other Useful Information (Cont.) Cleaning and maintenance CAUTION! • Before attempting any maintenance or cleaning the appliance, always switch the appliance off, disconnect it from the mains power supply and let it cool down until all surfaces are safe to touch. •...
- Page 16 Other Useful Information (Cont.) Troubleshooting If your appliance fails to operate, or you experience any other problem with the appliance, contact our after sales centre for advice. Before phoning for a service, please ensure that the appliance is properly plugged in and the outlet and circuit breaker or fuse are working properly.
- Page 17 Other Useful Information (Cont.) Technical specifications Model DF-EF1050AG2 Heating 2000W Rated power Fan only Voltage 220–240V~, 50Hz Dimensions (approx.) 260mm (L) × 250mm (W) × 375mm (H) Weight approx. 4kg Remote control button cell DC 3V CR2032 Compliance This product has been fully tested and meets all requirements as set out by standards AS/NZS 60335.1 and AS/NZS 60335.2.30.
- Page 18 This page has been left blank intentionally. After Sales Support 1300 886 649 | info@tempo.org...
- Page 19 This page has been left blank intentionally. After Sales Support 1300 886 649 | info@tempo.org...
- Page 20 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 for advice.
Need help?
Do you have a question about the DF-EF1050AG2 and is the answer not in the manual?
Questions and answers