Ceiling Mounting - Huawei Camera 500 Manual

Ceiling Mounting

Mount the camera on the ceiling with a self-purchased bracket. The bracket must meet the following
requirements:
• A minimum weight load of 10.5 kg (23.15 lb) and a thickness of 2 mm (0.08 in.) to 3 mm (0.12 in.).
• Comes with a location pillar, which can be inserted into the location hole of the Camera 500. The
distance between the screw hole on the bracket and the location pillar must be 14.5 mm (0.57 in.),
which is also the distance between the two holes at the bottom of the Camera 500.
• A screw hole and one 1/4"-20 UNC screw.
When securing the Camera 500, use the 1/4"-20 UNC screw included with the purchased bracket to avoid a
mismatch.
Mount the purchased bracket on the ceiling as needed, and then install the Camera 500 on the bracket.
Mounted on a Tripod
You can also secure the Camera 500 with a tripod. The minimum weight load of the tripod must be
10.5 kg (23.15 lb). Its mounting platform must match the bottom of the Camera 500.
5 3
Installing and Using the "Smart Eye" Cover
1
Understand the "smart
eye" cover.
"Smart eye" cover: attracted
with magnetic force
Securing tab: attached using
adhesive
"Smart eye" cover Securing tab
14.5 mm (0.57 in.)
101.5mm (4 in.)
2
Attach the adhesive side of the
securing tab to the left side of
the Camera 500. To disable the
"smart eye", attach the "smart
eye" cover on the "smart eye".
4
Screw hole depth: 4.0 mm (0.16 in.)
Use 1/4"-20 UNC screws.
Location hole
Diameter: 4.3 mm (0.17 in.)
3
To enable the "smart eye",
attach the "smart eye"
cover to the securing tab
to prevent the cover from
being lost.