Huawei Camera 500 Manual page 2

Mounting on Top of a Display
The Camera 500 can be mounted on top of a display if:
• Display thickness ≤ 80 mm (3.15 in.) or 100 mm (3.94 in.) < display thickness ≤ 160 mm (6.30 in.).
• The display is placed horizontally.
Use the L-shaped bracket, base, 1/4"-20UNC screw, M3x10 screw assembly, and velcro tape strips
which are delivered with the Camera 500. You need to prepare a ruler by yourself.
• Fix the display position before installation. If the display needs to be moved after the installation, uninstall the
camera and reinstall it after the movement is complete.
• If the frame width of the display is less than 11.8 mm(0.46 in.), the front panel edge of the base may block
part of the screen.
1
Install the Camera 500 on the base and
tighten the 1/4"-20 UNC screw.
3
Install the L-shaped bracket on the base.
Display thickness ≤ 80 mm (3.15 in.)
5
Install the Camera 500 on the display.
A display thinner than or equal to 80 mm
(3.15 in.) is used as an example here.
a
Closely attach the
L-shaped bracket
to the back of the
display.
100 mm (3.94 in.) < Display
thickness ≤ 160 mm (6.30 in.)
Pay attention to
the installation
direction of the
bracket.
b
Do not leave a gap
between the front
panel of the base
and that of the
display.
2
Measure the display thickness.
4
Stick a velcro tape strip to the
back of the display.
6
Secure the L-shaped bracket using a
velcro tape strap and tighten the
M3 x 10 screw assembly.
2
119.5 (4.70 in.) –139.5 mm (5.49 in.)