Introduction - HazeBase Hazer2 the Cube Instruction Manual

Hazer² – the cube

1. Introduction

The Hazer² is a latest generation haze generator. It offers a variety of
possibilities to show your light effects even better.
The Hazer² is used to generate haze. Thus, the atmospheric
effect can be created, which is necessary for an appealing light show.
Due to the adjustability of pump power, fan speed and blow-out angle, almost any
desired haze density can be generated.
A newly developed vegan, highly concentrated fluid is used. This
produces the finest droplets with maximum lifetime in the air.
The extremely quiet and adjustable fan allow the use in areas
where ambient noise is disturbing.
The Hazer² also offers several control options. In addition to the direct
operation at the device by means of a membrane keypad, the haze generator can be
controlled via DMX512/RDM, as well as via wired and wireless remote controls
(optionally available).
The 1 liter fluid bottle lasts from approximately 80 hours at minimum settings to 5
hours at maximum output.
The Hazer²'s directly heated vaporizer is up to
operating temperature in less than 10 seconds and requires only 350W despite
extremely high output.
It´s wide range input (100V-240V AC) allows it to be used anywhere in the world.
3