BNC 765 Series User Manual page 31

When you select a parameter on the user interface, if you press the unit measure button it will
automatically set the available range linked to the parameter.
Unit Measure Range Button
T/p
G/n
M/u
k/m
As example when you select a Frequency parameter and you press k/m the unit measure range that
will be inserted is kHz, if you press M/u it will be inserted MHz, if you press M/u it will be inserted
GHz, if you press T/p nothing will happen because that range is not available for the selected
parameter.
If more than one unit measure range is available for a selected parameter (i.e. Mega and Micro), if
you toggle the range button M/u, the range will change accordingly between Mega and Micro.
Ver. 2.3
Unit Measure Range
Tera / pico
Giga / nano
Mega / micro
Kilo / milli
Berkeley Nucleonics Corporation
info@berkeleynucleonics.com | www.berkeleynucleonics.com
2955 Kerner Blvd, San Rafael, CA 94901 | 800-234-7858
Model 765 User Manual
31 of 77