Component and cart combination to overturn. CAUTION AVIS BIG KNOB 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-...
As you might expect, the +4 dBu level is higher (louder) than the –10 dBV level, so it is important to match the input and output levels of Big Knob to the equipment you have connected to it. For a Big Knob input, the –10 dB setting accepts a smaller signal...
INPUT SOURCE SELECT Section These buttons turn on or off the four input signals connected to Big Knob. Any combination of the four inputs can be turned on at the same time, as indi- cated by the red LEDs above the buttons.
Page 8
This cool blue LED lights when the POWER switch is turned on and Big Knob is receiving AC power. It lets you know that Big Knob is turned on, even if no other buttons are pressed that would light up their associated red LED.
Page 11
For example, the DAW’s 1-2 outputs can send the main mix to the DAW MIX inputs on Big Knob, and the DAW’s 3-4 outputs can send a custom head- phone mix to the DAW PHONES MIX INPUT. You can then use the PHONES/STUDIO OUTS SOURCE...
Details concerning Warranty Service are spelled out in the Warranty section on page 19. If you think your Big Knob has a problem, please do everything you can to confi rm it before calling for service. Doing so might save you from the depriva- tion of your Big Knob and the associated suffering.
SERVICE DEPARTMENT 16220 Wood-Red Road NE Woodinville, WA 98072 8. We’ll try to fi x the Big Knob within three to fi ve business days. Ask Tech Support for the lat- est turn-around times when you call for your RA number. Big Knob must be packaged in its original packing box, and must have the RA number on the box.
Appendix B: Connections 1/4" TRS Phone Plugs and Jacks “TRS” stands for Tip-Ring-Sleeve, the three connec- tion points available on a stereo 1/4" or balanced phone jack or plug. TRS jacks and plugs are used for balanced signals and stereo headphones: Balanced Mono RING SLEEVE...
C. Service and repairs of Mackie products are to be performed only at the factory (see D below) OR at an Authorized Mackie Service Center (see E below). Unauthorized service, repairs, or modifi cation will void this warranty.
Page 20
LOUD Technologies Inc. 16220 Wood-Red Road NE • Woodinville, WA 98072 • USA US and Canada: 800.258.6883 Europe, Asia, Central and South America: 425.487.4333 Middle East and Africa: 31.20.654.4000 Fax: 425.487.4337 • www.mackie.com E-mail: sales@mackie.com...
Need help?
Do you have a question about the Big Knob and is the answer not in the manual?
Questions and answers