Step: Generating Technology System Data - Siemens SIMATIC S7-300 Getting Started

3.6

5. Step: Generating technology system data

Procedure
Sequence Activity
1 Double-click "Technology" on the mounting rail.
2 Select the "Technology system data" tab, then set the "Generate technology system data" check box.
Confirm with "OK".
Result: When you download these data to the PLC later on in this Getting Started, the system also
generates the technology system data and includes these in the download to your CPU 317T-2 DP.
Note: If you do not activate the check box, then the technology system data is also not generated.
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05
3.6 5. Step: Generating technology system data
Result
The "Properties - Technology" dialog box
opens.
Learning units
17