Altec Lansing Life Jacket 2 Manual

What's Included

Make sure the following items are included in your package.

Lansing Life Jacket 2

AC Adapter

USB Cable

AUX Cable

Mount

Charging

Connect the included USB Cable to the included AC Adapter to charge your speaker's internal battery. A full charge takes approximately 4 hours.

When charging, an orange LED light will illuminate. The orange light will turn off when your unit is fully charged.

Buttons

For a look at the various buttons on your speaker, view the graphic below.

Power On

To power on your speaker, press and hold the "" ON/OFF button for about two seconds.

Once powered on, you will hear your speaker audibly say "Powering ON."

Pair the Speaker Using NFC

With Near Field Communication (NFC), you can easily pair and connect your speaker to your compatible device. Just hold your NFC enabled device directly against the wireless check in spot on your speaker.
Power on your speaker. Go to the Bluetooth Manager of your Bluetooth device. Search Bluetooth devices and select "LifeJacket2" to start connecting.

Once paired, you will hear your speaker audibly say: "You are now paired, enjoy."

Disconnect the Bluetooth Pairing

While audio is playing, press and hold the " - " and "+ " buttons simultaneously to disconnect the Bluetooth pairing between your speaker and your audio source.

Connect Through the AUX In Port

You can also use the included 3.5mm Auxiliary Cable to connect audio devices through the AUX In port on your speaker.

Activate Siri

If your speaker is paired with an iOS device that is capable of running the Siri audio personal assistant application, you can use your speaker to activate Siri. To do so, press the power button "" 3 times.

Technical Support

For technical support issues please visit our website at www.alteclansing.com. You can find manuals, software and FAQ's at the website. Can't find what you are looking for? Call 1-855-292-4087 to access our technical support information on the phone.

Bonus Parts and Accessories

The following bonus parts and accessories are also included in your package.

Mount

Wrench

Using the Mount

The included mounting bracket allows you to attach your speaker to cylinder shaped surfaces such as the handle bars of a bicycle or ATV, or the rails on a yacht. This bracket comes unassembled. To use it, first attach the pieces as shown below. Next connect your speaker by screwing it into your speaker's tripod mount, and then attach the bracket to a suitable surface. Use the included wrench to help you loosen or tighten when necessary.

NOTE: If product is exposed to salt water we recommend that you rinse it o with tap water to maintain proper long term performance of your product

Altec Lansing One Year Warranty Card

This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

To Obtain Warranty Service and Troubleshooting information:
Call 1-855-292-4087 or Visit our website at www.alteclansing.com.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions. May cause harmful interference to radio or -television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/ TV technician for help.

Videos

Altec Lansing Mini Life Jacket 2 Review Video

Documents / Resources

References

• Altec Lansing

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Altec Lansing Life Jacket 2 Manual