ALTEC Lansing Mini LIFEJACKET 2 Quick Start Guide

What's Included

Make sure the following items are included in your package.

Buttons overview

For a look at the various buttons on your speaker, view the graphic below.

1. Power
2. Volume –
3. Volume +
4. LED Light Indicator
5. Charging Port
6. AUX IN Port
7. Bottom View: 1/4" attachment point for use with a tripod stand or suction cup mounts (available separately)

Charging

In order to charge your speaker's internal battery, connect one end of the included USB cable to the charging port on your speaker. Connect the other to a USB port or AC charging adapter. The LED Light indicator turns red when charging, and turns off when fully charged. Charging may take up to 3 hours.

Pairing Your Speaker With a Bluetooth Phone

• Press and hold the Power button for around 5s. Your speaker will enter pairing mode with voice once powered on.
• Go to the Bluetooth Manager of your Bluetooth device. Search Bluetooth devices and select "MiniLifeJacket2" to start connecting.
• If required, enter the PIN code " 0000 " and confirm the entry. Once paired, you will hear your speaker audibly say: "You are now paired, enjoy."

Listening to Music on Your Speaker

Play/Pause
Press the Power button to get music from your audio source to play or pause.

Next/Previous Song
Press and hold the Volume + or Volume- buttons for 2s to advance to the next song or go back to the previous one.

Increase/Decrease Volume
Press and hold the Volume + or Volume - buttons to increase or decrease the volume.

Wired External Audio Input

You can also use the included 3.5mm Auxiliary Cable to connect audio devices through the AUX In port on your speaker.

Technical Support

For technical support issues please visit our website at www.alteclansing.com. You can find manuals, software and FAQ's at the website. Can't find what you are looking for? Call 1-855-292-4087 to access our technical support information on the phone.

NOTE: If product is exposed to salt water we recommend that you rinse it o with tap water to maintain proper long term performance of your product

Using the Mount

The included mounting bracket allows you to attach your speaker to cylinder shaped surfaces such as the handle bars of a bicycle or ATV, or the rails on a yacht. This bracket comes unassembled. To use it, first attach the pieces as shown below. Next connect your speaker by screwing it into your speaker's tripod mount, and then attach the bracket to a suitable surface. Use the included wrench to help you loosen or tighten when necessary.

Activating Siri

If your speaker is paired with an iOS device that is capable of running the Siri audio personal assistant application, you can use your speaker to activate Siri. To do so, press the power button 3 times.

Altec Lansing One Year Warranty Card

This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting information:
Call 1-855-292-4087 or Visit our website at www.alteclansing.com.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions. May cause harmful interference to radio or -television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.

Videos

Altec Lansing Mini Lifejacket 2 Unboxing, Review, Sound Test Video

Documents / Resources

References

• Altec Lansing

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ALTEC Lansing Mini LIFEJACKET 2 Quick Start Guide