Filter; Robot Sensors And Charging Contacts - Dreame DreameBot L10S Ultra User Manual

Routine Maintenance

Filter

1. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects to
prevent damage.
2. Rinse the dust bin and filter with water and dry them completely before
reinstalling.
Note:
Rinse the dust bin and filter with clean water only. Do not use any detergent.
Use the dust bin and filter only when they are completely dry.

Robot Sensors and Charging Contacts

Wipe sensors and charging contacts of the robot by using a soft, dry cloth:
The cliff sensors and the carpet sensor on the bottom of the robot
Charging contacts at the back of the robot
The edge sensor on the side of the robot
LDS on the top of the robot
The bumper, the AI visual sensor, and the line laser sensors on the front of
the robot
Cliff Sensors
Note: Wet cloth can damage sensitive elements within the robot and the base
station. Please use dry cloth for cleaning.
EN
AI Visual Sensor
Line Laser Sensors
Laser Distance Sensor (LDS)
Line Laser Sensor
Bumper
Charging Contacts
Carpet Sensor
21